Home Companies Wenzhou Ginri Power Automation Co., Ltd.

5A 16 Channel PLC Transistor Module 24V NPN / PNP Input Signal For Servo System

Wenzhou Ginri Power Automation Co., Ltd.
Active Member

Contact Us

[China] country

Address: No.337,Kaichuang Road,Baitawang Industrial Distrit, Beibaixiang Town,Yueqing City,Zhejiang Province,China

Contact name:

Inquir Now

Wenzhou Ginri Power Automation Co., Ltd.

5A 16 Channel PLC Transistor Module 24V NPN / PNP Input Signal For Servo System

Country/Region china
City & Province zhejiang
Categories Chargers
InquireNow

Product Details

5A 16 Channel PLC Transistor Module 24V NPN / PNP Input Signal For Servo System

 

Transistor amplifying plate is non-contact, DC 24V controlled by 5-24V, transistor amplifying plate is divided into large current and small current type, large current MOS tube, small current Darlington tube, hydraulic solenoid valve Coil, electromagnetic switch, gas pressure solenoid valve, fluorescent lamps, etc. These can use Darlington tube, the maximum current 6A, high-power electromagnet, electromagnetic clutch, DC motor, high frequency heating, high current work light adopts MOS tube amplifier board, Transistor amplification board Tianli card input is NPN and PNP common, the world's PLC is suitable for use, in Europe a lot of PLC is 12V, when ordering explain about the voltage, there are some countries that use 5V, in The vast majority of PLCs in Asia are 24V output. The amplifier's amplifier outputs Darlington's tube. MOS transistors have both NPN and PNP. In Asia, they are usually controlled by NPN output. There are also some machine manufacturers that use PNP. Style wiring control, out of the European machine, the general cabinet all components must use PNP series, including PLC, PLC amplification board, photoelectric switch, sensors and so on.

 

The transistor's response speed is fast. There is no problem with switching off and turning 4 times a second. Some automation equipment must produce more than 200 products in one minute. This speed must be achieved, or it cannot meet the requirements.

 

Transistor output, this is the saying in circuit control. In many automation devices, the circuit ultimately needs to implement control on some execution components (such as motors, electromagnets). The control of these execution components by the circuit can be performed by switching devices such as relays, triacs, transistors, etc. Therefore, for the output of the circuit There are corresponding types of "relay output, bidirectional thyristor output, transistor output" and so on.

 

♦ Features

-- Standard DIN rain mounted

-- Status indication for each input

-- Special circuit for self test and anti-interference

-- High quality MOSFET with large load and excellent stability

 

♦ Typical Applications

• Micro-controller • PLC control • Servo System

• Electro-magnetic valve • DC Motors

• Home intelligent control

 

♦ Technical data

ModelJR-XJ
Output typeMOSFET(PNP OUT)
I/O points4CH,6CH,8CH,12CH,16CH
Input signalNPN/PNP
Input voltageDC24V
Output voltageDC 12-24V
Output Contacts1NO
Contact capacity(resistive)5A 24VDC
Operation voltage/Release voltage>5VDC/<1.5VDC
Operation time/Release time<10ms/<10ms
Switching frequency5kHz
Dimensions(WxH)87×46mm
MountingDIN rail

 

Hot Products

PLC 4 Channel Amplifier Board Positive Control Negative Control Optocoupler Isolation Electrical ...
Power PLC SCR Module PLC Silicon Controlled Rectifier DIN Rail Mounting JR-xK SCR module has the ...
8 Channel Electronic PLC SCR Module For PLC Outputs 24 VDC Inputs , 250VAC Outputs Thyristor ...
PLC 8 channel Silicon controlled Module 3.15A DC24V low on - resistance The PLC amplifier board ...
5A 16 Channel PLC Transistor Module 24V NPN / PNP Input Signal For Servo System Transistor ...
12 Way PLC Microcontroller DC Amplifier Board 8 Output CE / CCC Certificaton ■ Professional self...