Results forvolkswagen headlight leveling autofrom 8717 Products.
|
H1164NL Ethernet Transformer Module H1164 , Quad Port H1164NLT 10/100Base-TX H1164NL / H1164NLT 1:1 Transformer Quad Transformer 10/100 Base-T SMT Key Description: H1164NL / ...
|
|
|
|
HST-4047DR 10/100 Base-T Magnetics Modules Single port DIP ● Symmetrical TX and RX channels for auto MDI/MDIX capability. ● Approved for use with Broadcom BCM5226/BCM5228 and ...
|
|
|
|
NBR Molded Rubber Parts High Temperature Resistance , Auto Rubber Parts 70 Mold rubber parts are flexible rubber seals that stretch-fit onto the shaft and rotate with the shaft ...
|
|
|
|
Black NBR O Ring Rubber Seal For Pneumatics And Auto Parts NBR Rubber Seal Parts are flexible rubber seals that are excellent in Weathering Resistance and Ozone Resistance,Flame ...
|
|
|
|
Sand Dust Testing Chamber Enviromental Chamber IEC60529 IE7-512L 800x800x800mm Equipment overview: Sand Dust Testing Chamber Application areas: outdoor lighting, household ...
|
|
|
|
MLC65C-P1 Sensor driver 65w 1500mA integrated with sensor dimming function 202 x 58 x 30mm Description 1, Integrate Microwave sensor and dimmable led driver and daylight sensor ...
|
|
|
|
IP20 1-10v Dimmable LED Driver 50W with Auto Recover , No Need Sync Cable Description: 1, Color temperature adjustable by push button 2, Built-in Push dimming function 3, Constant ...
|
|
|
|
IP20 Daylight Harvesting Sensor Constant Current Dimmable Led Driver Description: Lux level can be maintained by MS01 accroding to ambient light level MS01 work with ML25C-V and ...
|
|
|
|
On - off Daylight Harvesting Sensor For LED T8 Tube , 600mA LED Driver Description: Widely applied for led T8 tube,panel light,ceiling lamp in meeting room,lobby,office Lux level ...
|
|
|
|
1x16W updated LED power supply 300mA output constant current with motion detector 1,Stand-by power <0.5W. 2, Stand-by dimming level is optional, 10%/ 25%. 3, Mounting height up to ...
|
|
|
|
MLC18C - P3 18W integrated sensor LED driver for LED ceiling light , ON - OFF / Dimming 1, Stand-by power ≤0.5W. 2, Support mounting height up to 6m Max. 3, Stand-by dimming level ...
|
|
|
|
28W Microwave sensor driver multiple constant current 450mA / 550mA / 600mA / 700mA Description: 1, Stand-by power ≤0.5W. 2, Support mounting height up to 6m Max. 3, Stand-by ...
|
|
|
|
MLC10C-P Sensor driver 10w 300mA/350mA integrated with sensor dimming function Description 1, Working mode: Auto switch on/off,or dimming by motion and ambient brightness level. 2, ...
|
|
|
|
MLC16C-P Sensor driver 16w 300mA/350mA integrated with sensor dimming function Description 1, Output power: 16w max. 2, Output current: 300mA,350mA set via dip sw.itches. 3, Output ...
|
|
|
|
MLC08C-P Sensor driver 8w 300mA integrated with sensor dimming function 90 x 54.5mm x 16mm Description 1, Designed esp. for 300x300mm Panel light in washing room. 2, Integrate ...
|
|
|
|
MLC18C-P2 Sensor driver 18w 300mA integrated with sensor dimming function 145 x 62 x 20mm Description 1, Sensor head 42 x 26mm,easy for installation on Panel light 2, Designed esp. ...
|
|
|
|
MLC12C-P2D Sensor driver 12w 270mA integrated with sensor dimming function 88 x 68 x 28.5mm Description 1,35 x 35mm Sensor head,user only need to open a 35 x 35mm hole on LED board...
|
|
|
|
MLC21C-P Sensor driver 21w 300mA/350mA integrated with sensor dimming function Description 1, Designed esp. for ceiling lamp. 2, Working mode: Auto switch on/off,or dimming by ...
|
|
|
|
MLC28C-P Sensor driver 28w 450mA / 550mA / 600mA /700mA integrated with sensor dimming function 82x28.5mm Description 1, Integrate Microwave sensor and dimmable led driver ...
|
|
|
|
350mA to 1050mA Dimming LED Driver Ceiling Mount With MW Sensor Description: MS01 Directly connected to 1-10V interface of ML50C-PV MS01 work with ML50C-PV and MC008S to provides ...
|
|
|
You may also be interested in :