Vocational Training Equipment Air Conditioner Trainer Practice model of air conditioner with standing cabinet

ZM6311 Practice model of air conditioner with standing cabinet

I. Main technical parameters

1. Working power supply: AC220V 50Hz ± 5% (unidirectional)

2. Dimensions: 1100 × 800 × 1800mm

3. Total power consumption: 1100W

4. Applicable voltage range: 160V ～ 253V

5. The maximum remote control distance is 8m and the angle is 90 degrees.

6. Noise: internal machine 37-44dB, external machine 55-65dB.

7. Ambient temperature: -5 ℃ -40 ℃

8. Relative humidity: ≤85% (25 ℃)

II. Main functions:

1. Learning to master the cabinet-type air-conditioning refrigeration system and principles can better master the maintenance technology.

2. Learn to master the structure, composition and working principle of the control circuit of cabinet air conditioner.

3. 10 fault points can be set, students can check on the fault detection board according to the fault phenomenon

Test and troubleshoot.

4. Due to the application of real air conditioning, basic training such as folding and refrigerant charging can be carried out.

5. With digital temperature display, the temperature display can detect the working temperature of each key part of the cooling and heating experimental equipment, and provide experimental data. The key points that can be detected are:

1) Normal ambient temperature

2) Air-conditioning compressor exhaust pipe

3) Air return compressor air return pipe

4) Air-conditioning condenser exhaust

5) Air outlet of air conditioner evaporator

III. Practical training items:

1) Failure of the rectifier circuit;

2) 12 volt power supply circuit failure;

3) 5 volt power failure;

4) Bad indoor temperature control probe;

5) Bad outdoor temperature control probe;

6) The remote control receiver is damaged;

7) No heating;

8) No refrigeration;

9) The indoor fan is damaged;

10) The outdoor fan is bad;

11) The fan capacitor is damaged;

12) Buzzer failure;

13) Wind direction adjustment is out of control.

Product Details and Warranty

We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time.

Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

 
Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

 
Photo for Clients Visiting Factory
 

 
 
Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.