2000mm Electrical Installation Training Equipment 5KVA Industrial Control Training Bench 60Hz

ZE3705 Equipment Teaching Electrical Installation Lab Industrial Control Training Bench

1.1 Overview

This training device includes various types of motor, capacitor, inductor, capacitor and other modules. Through related experiments, you can familiarize with and control the principles and control methods of motor control, and cultivate students' corresponding knowledge and skills. Assessment of teaching and skills training in secondary vocational schools and technical schools.

1.2 Features

(1) The training device adopts an aluminum column frame structure, and the power supply is integrated and installed.

(2) The unit circuit hanging box is fully configured and can be used in combination to complete the training content of various courses.

(3) The relevant units can be flexibly added to or deleted from the experimental subjects to meet the needs of different users.

(4) The device has a good safety protection system.

2 Performance parameters

(1) Input power: three-phase five-wire AC208V ± 10% 60Hz

(2) Overall dimensions: 2000mm × 840mm × 1410mm

(3) Overall capacity: 5KVA

(4) Weight: <390kg

(5) Working conditions:

Ambient temperature -10 ℃ ～ + 40 ℃

Relative humidity ＜ 85% (25 ℃)

3 Product composition

3.1 Power control screen

The power control screen uses an aluminum alloy profile panel, a closed box structure, and is connected to the lower rack as a whole. The upper part is fixed with an aluminum alloy beam that suspends the mobile box.

3.2 Power Box

(1) The three-phase five-wire power input is controlled by the leakage circuit breaker and is equipped with an emergency stop control button. In an emergency, the emergency stop button is pressed to cut off the power supply.

(3) Equipped with power indicator, power output socket and safety power output terminal.

(4) Built-in AC208V and AC120V AC power supply, DC power supply, all power supplies have short-circuit protection function.

3.3 Main supporting experimental hanging boxes and devices

(1) 3 contactor boxes

(2) 1 thermal relay box

(3) 1 brake

(4) 1 button hanging box

(5) 1 phase failure relay box

(6) 1 time relay box

(7) 1 inductive sensor

(8) 1 capacitive sensor

(9) 1 heat sink

(10) 1 inverter box

(11) 1 soft starter box

(12) Programmable controller (PLC, 24Vcc, 12 digital inputs, 8 digital outputs) Hanging box 1

(13) 1 ammeter hanging box

(14) 1 box for voltage distributor

(15) One emergency module (placed in the power supply box)

(16) Three-pole circuit breaker module

(17) Bipolar circuit breaker module

(18) Single-pole circuit breaker module

(19) Tuner motor

(20) Signing / activation module

(21) Symbol / reversing module for 3 positions

(22) Temperature regulator module

(23) Limit (close) the sensor module

(24) Limit (close) the sensor module

(25) Including auxiliary contactor module

(26) Multimeter

(27) 1 three-phase squirrel cage AC asynchronous motor

(28) 30 pieces of 4mm safety electrical connection cable

4 Can complete experimental training projects

1. Motor control circuit training project:

Motor jog control circuit

Experiment on the self-locking control circuit of the motor

Experiment of the motor's forward and reverse control circuit

Experiment of control circuit of motor delayed start

Experiment of starting control circuit of motor star delta

2. Inverter application circuit training project:

Inverter parameter setting experiment

Frequency converter speed setting speed regulation experiment

Experiment of frequency converter analog control speed

Segmented speed control experiment of frequency converter

3. Soft starter control training project:

Soft starter parameter setting and adjustment experiment

Soft starter start control circuit test

4. PLC control training project:

PLC PLC control motor jog control circuit

PLC control motor self-locking control circuit experiment

PLC control experiment of two motors interlocking control circuit

Experiment of PLC control motor forward and reverse control circuit

PLC PLC control motor delayed start control circuit experiment

PLC control motor star delta start control circuit experiment

PLC control inverter analog speed control speed experiment

PLC control inverter multi-speed control experiment

Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time.
 
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

 
Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.