Educational Equipment Trainer Domestic Air Conditioner Simulator

ZM6605 Educational Equipment Trainer Domestic Air Conditioner Simulator

• Simple air conditioning system

  Ventilation duct, cross section 250x250mm

  Selectable expansion element, using solenoid valves

  Expansion valve and capillary tubes 1m

  Radial fan with regulating fin

  Laminar evaporator with drip tray

  Compressor: 1/2 HP

  Condenser: Air cooled.

  Evaporation chamber, damper.

  Size (Length, Width, Height): 1100x720x490mm

  Weight: 80kg

   

  Must have fault insertion and simulation and allows drawing the P-I Diagram via 1.26

  

  User manual in Spanish with theory and practices for instructor and student

  Size: 1100x720x490mm

  Freezer main controller

  - Adopted 32-bit high-performance ARM processor

  - Built-in USB port for PC connection

  - Up to 16 temperature modules can be interlocked

  - Built-in RS-485 communication terminal for multipoint communication

  - The RS-485 communication circuit must be designed as an insulation structure to improve noise immunity.

  - 12-bit AD input for pressure and humidity sensor interlocked 16Ch

  - Built-in 16-channel digital input for function control.

  - 16 built-in LEDs to verify the output status inside the PCB

  - Built-in 16 external LEDs to verify the output status

  - Up to 16 relay output channels (8 basic channels, 8 optional channels)

  - The relay for the output must have a rating of 10 A or higher.

  - The SMPS and DCDC converter must be integrated and designed with an external signal and an insulation structure.

  - Power source: AC86 ~ 264V, 50 / 60Hz free voltage

  - Within the size of PCB 250X140

  It must contain the elements cited below as:

  Compressor: 1 / 2HP, single phase 220V, Control box.

  Condenser: Air cooled.

  Evaporator: Pin, Tube Type.

  Accumulator: 1 / 2HP

  Receiver Tank: 1 / 2HP

  Expansion Valve: Manual, welded.

  Electronic valve to operate: 3/8 ’’ with clamp or welded.

  Filter Dryer: 3/8 ’’ with clamp or welded

  Pressure gauge: High Pressure, Low Pressure.

  Filling nipple, attached to a nipple to fill

  Acrylic visor: with clamp or welded

  Duct: PC 250x250

  Fan: 220V, speed controller included

  Pin heater: 1Kw

  Wind Pressure: 220V Pitot Tube

  Temperature Sensor: 9 pieces

  Liquid Receiver, Accumulator

  Refrigerator temperature module

  - Built-in 4Digit FND with good visibility

  - Up to 16 temperature modules can be interlocked

  - Built-in RS-485 communication terminal for multipoint communication

  - RTD type temperature sensor input

  - Accuracy within ± 0.2 degrees

  - Built-in 10A rating relay

  - Built-in 4-bit rotary switch for address configuration

  - Using a 10 A output relay

  - Power source: DC24V

  - Front PCB size within 70X50

Product Details and Warranty

We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.

We supply 3 years warranty time.

Packaging & Delivery

Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.