ZM3109 Mechatronics Training Equipment MPS Modular Product System
I.Overview
This equipment is suitable for college, university, technical
schools mechatronics training system and maintenance major,
mechatronics technology application, electrical run and control,
electronics components application and maintenance, automatic
control major etc. experiment and hand on ability training.
It’s modern automatic production system, the maximum feature is
comprehensive and system.
This machine integrated mechanical technology, micro electronic
technique, electrician electronics technology, sensor measurement
technology, interface technology, information change technology,
network com technology, network communication technology and other
multi technology etc. It comprehensive applied in real industrial
product: production line sensor test, transmission and test,
control, actuator and drive mechanism be controlled in micro
handling unit.
Program logic controller(PLC) with high anti-interference ability,
it’s reliable, high quality price, and good price, cultivate
students to learn PLC technology, PLC network technology.
Automatic product line training assessment system is installed in
aluminum guide,
include Install material, processing, assembly, transmission,
sorting unit ,to fulfill a
training platform for automatic mechanical.
System use pneumatic drive technology,
inverter drive technology, step (servo) motor position control etc.
technology, system
control method is each working unit with one PLC to control,
various PLC use RS485
to control.
Use modular combination structure, each unit is independent, use
standard structure
and drawer to put shelf. With strongly interchangeability, students
will get trained
on different combination, such as installation, debug, simulate
product line, it’s
appropriate for competition and assessment.
II.Technical specifications
1.Work power: three phases, five wires, AC 380 V±10% 50 Hz
2.Dimension:＝2100mm×1000mm×1500mm(L×W×H)
3. PC desk dimension:600mm×530mm×1000mm(L×W×H)
4. Workbench structure: aluminum and steel
5. Whole capacity power ≤2 KVA
6. Safety protection: with ground protection, leakage protection,
overload protection, over current protection, misoperate
protection, safety reach Chinese standard, safety reach Chinese
standard.
III.Equipment structure
Automatic product line is installed in aluminum trial, include load
unit, process unit,
assembly unit, delivery unit, sorting unit etc. 5 units.
Every unit is a single system, at the same time, the 5 units are a
whole training system.
In equipment, there are many type of sensors, to judge material
movement, position,
color, material etc.
IV.Training project
1. It combines mechanical technology(include pneumatic technology).
Sensor technology , AC motor inverter speed adjustment and step
motor drive control, touch screen technology, PLC control and
communication network technology, to simulate modern manufacturing
process features.
Load unit installation and debug training
Processing unit installation and debug training
Assembly unit installation and debug training
Sorting unit installation and debug training
Delivery unit installation and debug training
Automatic production line equipment installation and debug training
2. Whole structure use open structure, it’s easy to disassembly,
can change module,
update and it’s flexible. For example, you can change expand unit
upgrade electric as fieldbus
Position module control servo motor etc.
3. It can be applied in teaching, to fulfill the following task
1) pneumatic system installation and debug
This equipment include single out cylinder, rotary cylinder
,pneumatic actuator, single control solenoid directional change
valve, double control directional change valve, magnetic switch
etc. pneumatic control unit, to fulfill the following pneumatic
technology task.
pneumatic direction control circuit installation
pneumatic speed control circuit installation
Swing control circuit installation
pneumatic sequence control circuit installation
pneumatic mechanical arm installation
pneumatic system installation and debug
pneumatic comprehensive design and installation
2) Electric control circuit installation and PLC program write
Select this PLC module, invert, sensor to fulfill the following PLC
applied technology
The connection of control circuit of three-phase motor and
reversing andcontrol program edit
The connection of control circuit of three-phase motor control
program edit
Motor speed control circuit connect and control program edit
Inverter simulation control connect and control program edit
through free port program to realize inverter network control
Use PLC pulse output or position module to control servo motor
technology (expand)
Servo motor control circuit connection and parameter setting
PLC control network control technology
pneumatic direction control program edit
pneumatic sequence action control program edit
pneumatic mechanical arm control program edit
belt conveyor control program edit
mechatronics training control program edit
Automatic production line control program and write
3) PLC network communication installation .program write and debug
:
PLC control technology ---485 communication technology program and
debug
PLC control technology ---fieldbus communication technology program
and debug (expand)
4) Mechatronics equipment install and debug project
Work Use this set equip mechatronics system components, PLC module,
inverter and instruction switch, sensor etc. to fulfill the
following mechatronics equipment work task
Gearing coaxiality adjustment
Load unit
Processing unit Mechanical installation and debug
Assembly unit Mechanical installation and debug
Sorting unit Mechanical installation and debug
Delivery unit Mechanical installation and debug
Automatic product line equipment installation and debug
Remark: equipment include a touch screen, you can control from
there, we don’t equip with computer, please order from your local
market.
Don’t include training charge. We debug well equipment, and send
the whole set. Make training VCD for you.
We don’t send engineers to abroad for training. If you insist
training, you can send person to our factory, training is free, but
you pay for flights, hotel, food, traffic etc.
Quotation with fine wooden package, CIF to Malaysia, in 20 feet
cabinet(the whole cabinet). Insurance 110% of total goods value.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items
|
