Active Member
|
[China]
Address: 301 Rm., B Bldg., No.2 TianTai 1st Rd., Kexue Chen, HuangPu Dist., Guangzhou 510032, Guangdong Province, China
Contact name:Devina
ROADPASSION AUTOMOTIVE TECHNOLOGY (GUANGZHOU) CO., LIMITED |
|
|
Add Front Backup Rear Camera For Peugeot 508 With Video Inputer Camera Interface
What is camera decorder video interface?
This interface allows you to connect a reverse camera to your factory navigation system. Once installed, the video from the factory TV tuner can be viewed whilst the car is in motion instead of only when stationary.
Camera interface is a decorder making to dedicated to fit with car factory screen, while decoders do serve the purpose of integrating IP cameras into a digital video recorder-based system, they also allow older monitors to show video footage. Which can help you to see very clearly the surrouding via front camera and rear camera.
Car camera multimedia video interface allows to connect two cameras to car's factory LCD monitor, it dedicated to design for AUDI NON MMI A4 A5 Q5 Cocert Symphony system, including the dedicated fit LVDS cable, power CANBUS cable, camera RCA connector, as well as a main unit. Everything design is for no harmness installation, just plug and play. After installation, you can see the camera view via car's factory screen to assist parking with dynamaic parking guidelines moving with the steering wheel. Which is neccessary and safe for each car.
Camera Multimedia Video Interface Functions
| 1. Firmware can be updated by micro SD card |
| 2. Plug&Play interface and no harmness to any cable |
3. LVDS output support 800x480, 400x24, or 1024x480 screen |
| 4. Dynamic Parking Guidelines with original Radar-detection image |
| 5. Front camera (DVR optional) &Rear camera inputs and auto-switch |
| 6. Comptible Camera Format: NTSC Format |
| 7. Overlay car's factory parking sensors |
| 8. Support Camera input, DVR &front camera |
| 9. Compatible with Peugeot NAC 2018-2019 (800x480 screen) |
| 10. Installation guide provided |
Package Contents:
1 * Interface main unit
1 * LVDS cable
1 * Power cable
1 * Camera inputs harness
1 * Rear handle camera (optional)
1 * Camera extensive cable (opitonal)
1 * Camera power & GND wire
Camera Multimedia Video Interface compatible car model
For Peugeot NAC 2018-2019 (800x480 screen)
Camera Multimedia Video Interface Parameter
| Operation voltage | 7V – 25V |
| Stand-by power drain | <10mA |
| Video input | 0.7V - 1V |
| Video input formats | NTSC |
| RGB-video amplitude | 0.7V with 75 Ohm impedance |
| Temperature range | -40°C to +85°C |
| Dimensions video-box | 113×22×92 mm (W×H×D) |
| Dimensions CAN-box | 73×22×30 mm (W×H×D) |
