Henan Pingyuan Mining Machinery Co., Ltd |
|
ZS mineral industrial sieve shaker linear vibration separator vibrating screen
Introduction
Linear vibrating screen is designed with dual-vibration motor
drive,two synchronous motors are reversely placed so that the
exciter generate reverse excitation force, the exciting force
generated by eccentric block cancel each other out on the parallel
direction of motor axis,and stack together with the perpendicular
direction of motor axis, so its trajectory is linear.Linear
vibrating screen is suitable for particle size from 0.074 -5 mm,the
maximum size should be less than 10mm.
Working Principle and Application
Linear vibrating screen is widely used in mining, coal,
refractories, metallurgy, building materials and other
industries.It is usually used for the screening and grading
materials in large, middle and small particles.
Advantages and Feathers
1. Less energy consumption,lower noise,longer service life
2. The beam and screen box are connected by high strength blot
without welding
3. High accuracy screening efficiency,simple and stable structure,
convenient maintenance
4. Suitable for rough screening with high capacity
5. Long travel distance for materials on the screen surface, high
screening efficiency
Technical datas:
Type | Layer | Sieve Dimension (mm) | Sieve Mesh (mesh) | Particle Size(mm) | Capacity (t/h) | Power (kW) | Double Amplitude (mm) | Frequency (r.p.m) | Screen Angle (degree) |
ZS-520 | 1-5 | 500X2000 | 2-325 | <20mm | <5 | 0.37x2 | 6-10 | 1460/960 | 0-10 |
ZS-525 | 1-5 | 500X2500 | 2-325 | <20mm | <8 | 0.37x2 | 6-10 | 1460/960 | 0-10 |
ZS-612 | 1-5 | 600X1200 | 2-325 | <20mm | <3 | 0.37x2 | 6-10 | 1460/960 | 0-10 |
ZS-1020 | 1-5 | 1000X2000 | 2-325 | <20mm | <12 | 0.75x2 | 6-10 | 1460/960 | 0-10 |
ZS-1025 | 1-5 | 1000X2500 | 2-325 | <20mm | <16 | 0.75x2 | 6-10 | 1460/960 | 0-10 |
ZS-1030 | 1-5 | 1000X3000 | 2-325 | <20mm | <20 | 1.1x2 | 6-10 | 1460/960 | 0-10 |
ZS-1224 | 1-5 | 1200X2400 | 2-325 | <20mm | <23 | 1.5x2 | 6-10 | 1460/960 | 0-10 |
Selection Conditions
♦ Material to be processed:
| ♦ Screen layer/deck/sieve number:
|
♦ Bulk density: t/m3 | ♦ Mesh size of every screen layer/deck/sieve: mm |
♦ Material Temperature: ºC | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Water Content: % | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Drive: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. granule size: mm | ♦ Working environment temperature: °C |
♦ Particle distribution percentage:
| ♦ Working power supply: 3 Phase V Hz |
♦ Handling capacity: t/h | ♦ Quantity: sets |