Active Member
|
[China]
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
Contact name:Wang
Henan Pingyuan Mining Machinery Co., Ltd |
|
|
Customized Cement Plant V Type Belt Conveyor Equipment System
Introduction
DTII fixed belt conveyor is the upgrade product from TD75, its
adaptability is stronger, and be widely used. The operation
temperature of belt conveyor is from -25ºC~40ºC, and request
temperature of conveyed materials not exceed 60ºC; The heat
resistance rubber belt can convey the high temperature materials
that below 120ºC, the belt conveyor is not suitable for convey
higher temperature materials. The oil-resistance, acid resistance
rubber belt are used to convey acid, alkaline, oil materials and
some materials with organic solvent.
Advantages and Features
1. Conveyor length can be customized according to your need.
2. 0° – 30° inclination to suit the on-site conditions.
3. Belt width can be 500-2400mm as your require.
4. Low horsepower compared with other types of conveyor
5. Belt conveyor cleaner is installed to clean the conveyor belt.
6. Corridors are built along the belt conveyor for inspection and
maintenance.
7. Conveyor rollers are manufactured by our special roller
production line, available of types of roller to ensure smooth
conveyor system.
8. Conveyor belt brand is YOKOHAMA, high quality and reliable.
9. Motor brand can be domestic or imported: Yutong, Shuangyu, ABB,
Siemens, WEG etc;
10.Bearing brand can be domestic or imported: C&U, LYC, HRB ,
WZS, FAG, NSK, SKF etc.
Technical datas:
| Roller form | Running speed(m/s) | Belt width (mm) | |||||
| 500 | 650 | 800 | 1000 | 1200 | 1400 | ||
| capacity(m3/h) | |||||||
| Trough roller | 0.8 | 78 | 130 | -- | -- | -- | -- |
| 1.0 | 97 | 164 | 278 | 435 | 655 | 891 | |
| 1.25 | 122 | 206 | 348 | 544 | 821 | 1115 | |
| 1.6 | 156 | 264 | 445 | 696 | 1048 | 1427 | |
| 2.0 | 191 | 323 | 546 | 853 | 1284 | 1748 | |
| 2.5 | 232 | 391 | 664 | 1033 | 1556 | 2118 | |
| 3.15 | -- | -- | 824 | 1233 | 1858 | 2528 | |
| 4.0 | -- | -- | -- | -- | 2202 | 2996 | |
| Falt roller | 0.8 | 41 | 67 | 118 | -- | -- | -- |
| 1.0 | 52 | 88 | 147 | 230 | 345 | 469 | |
| 1.25 | 66 | 110 | 184 | 288 | 432 | 588 | |
| 1.6 | 84 | 142 | 236 | 368 | 558 | 753 | |
| 2.0 | 103 | 174 | 289 | 451 | 677 | 922 | |
| 2.5 | 125 | 211 | 350 | 546 | 821 | 1117 | |
Selection Conditions
♦ Material to be processed:
| ♦ Installation angle: ___°(if the installation is inclined) |
♦ Bulk density: t/m3 | ♦ Lifting height: ___m (if there is slope angle) |
♦ Water content: % | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Material temperature: °C | ♦ Downstream equipment (what kind of equipment is used to discharge the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Material is sticky or not: (Yes or No) | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Granule size of material: mm | ♦ Working environment: (indoor or outdoor) |
♦ Max. Granule size: mm | ♦ Working environment temperature: °C |
♦ Handling capacity: t/h | ♦ Working power supply: 3 Phase V Hz |
♦ Conveying length: m | ♦ Quantity: sets |
| ♦ Installation of the conveyor is inclined or not: ___ (Yes or No) |
