Active Member
|
[China]
Address: 289 Yellow River Road, Xinxiang City, Henan Province, China
Contact name:Wang
Henan Pingyuan Mining Machinery Co., Ltd |
|
|
Corrugated Sidewall Belt Conveyor / Steeply Inclined Vertical Belt Elevator
Introduction
This machine is a continuously conveying equipment for general purpose materials in bulk and adopted belt with waviness sides and diaphragm plate. It is specially using for big inclined angle conveying.It is widely used for coal, chemical industry, building materials, metallurgy, electric power, light industry grain, port, shipping etc. Specific gravity of bulk materials is 0.5-2.5 t/m³ It can be conveyed in the working environment where the temperature is during -15 degree to 140 degree.
Advantages and Features
1.Flexible transportation – can convey all kinds of bulk materials such as coal, ore, sand, fertilizer and grain in horizontal, oblique, vertical or other angle directions.
2.High tensile strength
3.Increases belt capacity
4.No spillage with steep angle conveying
5.Decrease necessary conveyor footprint
6.No transfer points- the belt are capable of turning at any angle right from feed hopper to discharge point
7.Maximum utilization of space – able to convey material at angles up to 90 degree
Technical Parameter
Belt Width (mm) | Height of Sidewall (mm) | Belt Speed (m/s) | Angle of Inclination (°) | Capacity (m³/h) |
| 500 | 80 | 0.8-2.0 | 30-90 | 84 |
| 100 | 112 | |||
| 120 | 98 | |||
| 650 | 100 | 0.8-2.0 | 156 | |
| 120 | 140 | |||
| 160 | 186 | |||
| 800 | 120 | 0.8-2.5 | 186 | |
| 160 | 318 | |||
| 200 | 360 | |||
| 1000 | 160 | 1.0-2.5 | 428 | |
| 200 | 483 | |||
| 240 | 683 | |||
| 1200 | 160 | 1.0-3.15 | 535 | |
| 200 | 765 | |||
| 240 | 1077 | |||
| 300 | 1358 | |||
| 1400 | 200 | 1.0-3.15 | 920 | |
| 240 | 1298 | |||
| 300 | 1657 | |||
| 400 | 2381 | |||
| 1600 | 200 | 1.25-3.15 | 1074 | |
| 240 | 1515 | |||
| 300 | 1953 | |||
| 400 | 2807 | |||
| 1800 | 240 | 1.25-4.0 | 2200 | |
| 300 | 2724 | |||
| 400 | 4106 | |||
| 500 | 5036 |
Capacity is under 30° angle and maximum belt speed.
Note: All the parameters are for reference only, we can design and manufacture as per your requirements.
Selection Conditions
♦ Material to be processed:
| ♦ Top horizontal section length: m |
♦ Bulk density: t/m3 | ♦ Conveyor angle: ___° |
♦ Water content: % | ♦ Lifting height: ___m |
♦ Material temperature: °C | ♦ Upstream equipment (what kind of equipment is used to feed the material): |
♦ Material is corrosive or not: (Yes or No) | ♦ Downstream equipment (what kind of equipment is used to feed the material): |
♦ Material is sticky or not: (Yes or No) | ♦ Motor and gearbox: (Domestic or International brand or designated brand?) |
♦ Granule size of material: mm | ♦ Construction material: (Carbon steel, SS304, SS316L or any special requirements) |
♦ Max. Granule size: mm | ♦ Working environment: (indoor or outdoor) |
♦ Handling capacity: t/h | ♦ Working environment temperature: °C |
♦ Conveying length: m | ♦ Working power supply: 3 Phase V Hz |
| ♦ Bottom horizontal section length: m | ♦ Quantity: sets |
