50 Ton Chain Bucket Elevator TB Lime Link Chain Hopper For Grain Transport

50 Ton Chain Bucket Elevator TB Lime Link Chain Hopper For Grain Transport

Introduction

Bucket elevator’s traction configuration is plate chain , which is used for vertically transporting powder , granular and block material , and also high grinding material , such as coal powder , slag , limestone , cement raw material , cement clinker , cement , coal , dry clay etc , material temperature is less than 250℃. Max. Lifting height can be 40m. It is special for cement, so we also call it cement bucket elevator.

Working Principle and Application

Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chains, above or below which is a drive sprocket and a divert sprocket. Continuous chain or belt bucket elevator for cement is generally equipped with chassis to prevent the dust flying into the bucket elevator.

Advantages and Features

• 1. Efficient bucket elevator machine with large capacity, high lifting height.
  2. With kinds of buckets, to meet the requirement of different types of material.
  3. THG bucket elevator adopts alloy steel ring chain, after surface treating and heat treating, moderate hardness, high strength, better abrasive resistance.
  4. TDG bucket elevator adopts steel cord rubber belt, good toughness, high strength.
  5. Head, tail parts and middle housing cases with good sealing, no material and dust leaked, with no pollution.
  6. With hold back to prevent material back flow when shut down in an emergency.
  7. Bottom adopts counter weight take-up device, make itself automatic take-up, to avoid belt track slip or chain take off.
  8. Increase speed control sensor and mechanical level detector, it is matched by customized.
  9. Motor brand can be domestic or imported: Yutong, Shuangyu, ABB, Siemens, WEG etc;
  10. Bearing brand can be domestic or imported: C&U, LYC, HRB , WZS, FAG, NSK, SKF etc.

Technical Parameter

Note: All the parameters are for reference only, we can design and manufacture as per your requirements.

Selection Conditions