Results forvibration test table 3500hzfrom 8238 Products.
|
φ75 mm Test Rod As Per IEC 60335-2-30:2009 (Ed.5.0) Table 101 The dimension would be diameter 75 mm (radius of sphere: 37,5 mm), tolerance +/- 0,5 %. Length approx. 200 mm. Wall ...
|
|
|
|
Turntable -Ingress Protection Test Equipment , IEC Test Equipment Product Introduction The rotating table is manufactured in accordance with the standard of Clause IEC60529 testing ...
|
|
|
|
IEC 60601-1- Hand transmitted vibration,Vibration Meter Technical parameters: 1. According to IEC 60601-1 clause9.6.3 2. Channel: 3. 3. Frequency range: 0.5Hz ~ 400Hz. 4. Measuring ...
|
|
|
|
UL Standard for Safety for Electrical Quick-Connect Terminals, UL 310 Ninth Edition 5.2.2 Test tab 5.2.2.1 Test tabs for the insertion-withdrawal test described in Clause 6.4 shall ...
|
|
|
|
IEC 60529 IPX3/IPX4 oscillating tube with rotation table, control system and water tank Specification: Clause 1.1 Main control unit 1.1.1 One (1) unit of main control unit shall be ...
|
|
|
|
IEC 60529 Oscillating Tube Tester, IPX3/IPX4 Product infomation The test is made using one of the two test device described in figure 4 and in figure 5 in accordance with the ...
|
|
|
|
IEC60529 IPX1 IPX2 Tester Ingress Protection Testing With Water Filtration Unit Product information: This test device is to verify Protection against Vertically Falling Water Drops...
|
|
|
|
IP12 Drip Test Chamber Function Description The chamber is applicable to check whether the device and components are ensured good performance when electrical product and its outer ...
|
|
|
|
Bend Test / SeismicTest of Appendix of Eletrical Appliance and Material Safety Law(the first Supplementary Table 24) Standard requirement: Number of trials: adjustable Bending ...
|
|
|
|
Screwed Glands Tester IEC60598-1 clause 4.12.5 Torque Tests On Glands Product details: The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. ...
|
|
|
|
ISO5356-1 Anaesthetic and respiratory equipment — Conical connectors Test equipment Check compliance by engaging the cone or socket in the appropriate plug or ring test gauge ...
|
|
|
|
IEC 60529 Drip Box, IPX1/IPX2 IPX1, IPX2, IEC60529, GB4208, vertical drop test box. IPX1 uses the vertical drop of water tank, shell in the speed of 1r/min turntable, turntable ...
|
|
|
|
ISO 80369-7 Fig C.3 — Female reference connector for testing female luer lock connector for separation from axial load and resistance to overriding ISO 80369-7 FIGURE C.1 and C.3 ...
|
|
|
|
USB Type-C Connectors and Cable Assemblies Compliance - Figure D-1 Example of 4-AxIs Continuity Test Fixture Table D-1 Force and Moment Requirements Receptacle configuration with ...
|
|
|
|
IEC60695-11-5 Table Type Needle Flame Tester for Assessing the Internal Fault Conditions Caused By Small Flame Product Description According to IEC60695-2-2 and IEC60695-11-5 ...
|
|
|
|
Lamps and Lanterns Adjusting Devices Product information: The device is used to detect adjustment device, and confirm to the IEC60598-1 clause 4.14.3. The adjustment device, ...
|
|
|
|
ISO 80369-7:2017 Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications a Maximum distance from ...
|
|
|
|
ZR-1070 model blocked microorganism penetration experiment system Product introduction The zr-1070 model is composed of air source generator system, detection body, protection ...
|
|
|
|
System introduction: The system is used to evaluate the vibration level of hand-held electric tools and hand-held power tools. The vibration signal is measured by the vibration ...
|
|
|
|
Load machine KP-FZ012 This load machine is designed and processed in accordance with Table 17 in GB15092.1-2010 and Figure 9a in Chapter 7.1.2.3, and the peak surge current is ...
|
|
|
You may also be interested in :