Rubber Injection Molding Machine 300 Ton For Making Silicon Rubber Respirator

 why choose first in first out rubber injection molding machine

1. Adopting a first-in, first-out device to prevent dead material from remaining, and the rubber material can be easily replaced without waste.

2. The temperature of the injection pipe oil is controlled by a constant temperature system to prevent vulcanization of dead glue.

3. The use of low-speed high-torque hydraulic motors can ensure high hardness of the rubber material quickly.

4. Adopt linear vertical injection system to ensure the injection pressure and the hardness of injected rubber can reach 90 degrees.

5. The device is equipped with a fully enclosed safety baffle and grating, alarm prompts and a high-precision measuring scale device, to clearly and safely grasp the status of the machine.

6. Proportional oil circuit system, low noise and automatic pressure adjustment function, accurate and stable.

7 Short nozzle designs, no spillage, no plastic leakage, can shorten the plasticization time.

8. Special cold runner device can be customized to save rubber material.

Do you know what time you have to change the oil of the injection machine? It depends on the degree of contamination of oil.

1. Visually change the oil method. It is based on the experience of the maintenance personnel, according to the visual observation of some changes in the normal state of the oil - such as oil blackening, odor, milky white, etc., to decide whether to change the oil. This method depends on the experience of the actual operator.

2. Sampling test method. Periodically test the oil in the vulcanizer to determine the necessary items (such as viscosity, acid value, moisture, particle size and content, corrosion, etc.) and indicators, according to the actual measured value of the oil quality and the specified oil deterioration standard. For comparison, make sure the oil should not be replaced. Sampling time: The hydraulic system of general construction machinery should be carried out one week before the oil change period.

The hydraulic system should be sampled and tested every 500 hours, and the test results should be filled in the equipment technical file.

Shipping and packing

Company information

Guangzhou JuChuan Machinery Co.,Ltd was established in 1997. We are mainly specializing in producing silicone/rubber injection molding machines, Vacuum compression molding machines, plate vulcanizing machine, “all-in-out” ,liquid silicone injection machine, ”first in first out” ,”first in last out”, vertical and horizontal silicone/rubber injection machine for 20 years.

We have a special company patent: Anti-collision Molding System prevent mold damage occurring form misalignment.

Trade show:

Contact:

Sherry Leung      

TEL:86-20-34812608/34812609      

wechat:xiu826

Mobile/whatsapp:008613631439040

Website:  www.juchuan.en.alibaba.com