Active Member
|
[China]
Address: BLOCK 64 FUMIN INDUSTRY ,PINGHU TOWN,LONGGANG DISTRIC ,SHENZHEN CITY
Contact name:LISA XIAO
SHENZHEN JOINT TECHNOLOGY CO.,LTD |
|
|
Introduction:
1. V855 was upgraded based on V855, which is with characteristic of
higher rigidity and precision which can not only processing
for part, but also for mould.
2. VMC-V855 has the characteristics of fast feed speed and high rotation speed,so it is suitable for batch parts with many tools, complicated processing and multiple processes. Mainly processing cabinets, complex curved surfaces, heterosexual parts, disks, sleeves, plate parts, etc., are widely used in electronics, machinery and automotive, automation, medical, national defense and other fields.
Advantages after upgrading:
1. Its column adopts strengthen one, which improves machine
rigidity.
2. Working table size is enlarged to 1000*550mm
3. Travel of Y axis and Z axis increased to 540mm
4. Spindle adopts to use strengthen one, whose diameter increases to φ150
5. Ballscrew changes from 3616 to 4016
6. YZ axis is 45 roller ballscrew linear guideway, and Z axis rail is with 6 sliders.
7. Tool magazine is supported by column instead of side hanging, which reduces the deformation of column.
8. Taiwan brand cover, Germany R+W coupling.
Specification:
| Model | V855 | |||
| Travel | X axis travel | mm | 800 | |
| Y axis travel | mm | 540 | ||
| Z axis travel | mm | 540 | ||
| Distance between spindle and table | mm | 140-690 | ||
| Distance between spindle and column | mm | 590 | ||
| Table | Size | mm | 1000*500 | |
| Load | kg | 500 | ||
| T slot size | mm | 3-18-130 | ||
| Spindle | Taper | BT40 | ||
| Installment diameter | mm | Φ150 | ||
| Rotation speed | r/min | Belt 50-10000/Direct 12000/15000 | ||
| Three axis | X,Y axis motor output torque | N.M | 13.7/11 | |
| Z axis motor output torque | N.M | 22.5/20 | ||
| X,Y axis motor rate | KW | 2.0/1.8 | ||
| Z axis motor rate | KW | 3/3 | ||
| Cutting feed | m/min | 15 | ||
| Rapid feed | m/min | 48/48/48 | ||
| Arm type Tool magazine | Tool capacity | T | 24 | |
| Maximum diameter/ length/ weight of tool | mm/mm/kg | 80/200/8 | ||
| Maximum diameter of tool (no tool) | mm | 150 | ||
| Tool change time (T-T) | s | 2.8 | ||
| Accuracy | Positioning accuracy (X/Y/Z) | mm | 0.006/0.006/0.006 | |
| Repeat positioning accuracy (X/Y/Z) | mm | 0.005/0.005/0.005 | ||
| Other | Dimension | mm | 2450*2535*2660 | |
| Power capacity | KVA | 15 | ||
| Weight | kg | 5200 | ||
Standard accessories: 1. Mitsubishi/ Fanuc controller system | Optional accessories: 1. Screw type conveyor |
Application Industry:
Overview:
Package:
1. Our wooden pallet (wooden case) would fumigate and can get fumigation certificate.
2. Our package will be very careful for the parts, accessories for the machine.
Every part, accessory that need to be removed from machine, we will use pearl cotton and transparent film to pack them.
And make a note of them.
