|
[China]
Trade Verify
Address: Room 301-1, Taifeng Building, No. 73 Helong Second Road, Jiahe Street, Guangdong/Guangzhou/Baiyun District
Contact name:Hugo
Guangzhou Kema Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Product Parameter
| Input Power | 2000W |
| Screen | 10.4 inch touch screen |
| Voltage | 110V/220V |
| Wavelength | 808nm |
| Frequency | 1-10Hz |
| Pulse Width | 10-200ms |
| Energy Density | 0-150J/cm2 |
| Temperature | 0-40C |
| Spot Size | 10mm*12mm |
| Mode | Single pulse and Contiuous pulse |
| Cooling System | semiconductor,water cooling |
Working principle
Diode Laser
Using the gold standard laser with wavelength of 808nm, the
semiconductor laser emits near-infrared light waves, which can
penetrate deep into the roots of hair follicles, heat the pigments
in them and spread to the entire hair follicles, which can
accurately destroy the hair follicles without causing damage to
adjacent tissues, resulting in permanent hair removal.
Semiconductor lasers are stacked with ultra-micro semiconductor
laser chips, representing a high level of laser chip integration
technology, with more stable performance and particularly
comfortable
Picosecond Lase
Ultrashort-pulse picosecond lasers can effectively produce
optomechanical effects that break up pigment particles into small
pieces. Compared with nanolasers, picosecond lasers require lower
energy to achieve results. Less treatment, better treatment
effect.Stubborn green and blue tattoos can also be removed
effectively.
Advantages
1. High-Tech
Picosecond laser machine used unique Honeycomb Focused technology
to form a skin effect vacuolization,which can protect skin from
damage during treatment.
2. Fast effective
Picosecond laser machine make tattoo and pigment removal treatment
process from 5 to 10 times reduced 2 to 4 times,greatly reduce the
treatment and recovery time,with fast and obvious effective.
3. Confirtable and safe
It can remove all kinds of pigment and tattoo effectively and
safel,because picosecond laser use precise positioning of the
target tissue therapy to reduce damage to the skin to achieve the
freckle effect.
4. No melanin precipitate
The picosecond laser uses ultra-short pulses(one trillionth of a
second in length)to hit the melanin with a great pressure,the
melanin shatters into tiny dust-like particles,Because the
particles are so small,they are more readily absorbed and
eliminated by body.It will significantly reduce postoperative
serlling ,melanin precipitate phenomenon .
1. Constant temperature system
Intelligent Al chip, precise temperature control Ensure a constant
temperature of 4C
2. Output speed
Frequency 1-10HZ controllable, pulse output
3. Safety performance
When the ratio between the energy value and the frequency value
does not comply with the safe output energy density, the system
will automatically adjust the safe state
