|
[China]
Trade Verify
Address: 4F, Building 5, Dongluyang Industrial ,Park, No. 4, Tengfeng 4th Road, Fuyong Phoenix Third, Industrial Zone, Baoan District, Shenzhen China
Contact name:Terry
Shenzhen Veikong Electric Co., Ltd. |
|
Verified Suppliers
|
|
|
0.75kw 1.5kw 2.2kw IP20 IP65 3 Phase Solar Pump Inverter MPPT control
| 220V | 380V |
Max input DC voltage | 450V | 810V |
DC voltage range | 150~450VDC | 300~810VDC |
Normal working DC voltage | 260V-400V | 400V-650V |
Recommended input mppt voltage | 330V | 550V |
MPPT efficiency | >99% | |
Rated output voltage | 1/3-phase 220VAC | 3-phase 380-480VAC |
Output frequency range | 50/60Hz | |
Max efficiency of the machine | 99% | |
Ambient temperature range | -10 °C~50 °C, derating if the temperature is above 40 °C | |
Cooling method | Air cooling | |
Protection degree | IP20/IP21 | |
Altitude | Below 1000m; above 1% for every additional 100m. | |
Standard | CE/ROHS | |
Advantages:
1, Built in EMC C3 filter, use newest software and unique design.
2, Suitable for single phase pump, three phase pump. Permanent magnet synchronous pump
3, Support PV input and AC input at same time, make system work 24 hours.
4, Built-in MPPT technology with up to 99.9% efficiency.
5, With water level detection function, automatically regulate the pump flow to prevent dryrunning
6, Water full protection function and dry runing protection
7, Support optional LCD keypad, and optional GPRS moudule, it is easy to operate and monitor system situation
8, Built-in soft start, overvoltage, overload, undervoltage and
weak sunshine protection function
9. Support full water and low water protection
10. Support one button to switch AC
Technical Questions and solutions
1. How to achieve Automatic start after stop?
If it is controlled by keyboard no need to set any parameter. If you want to control by external switch
As the default control mode is keypad control, First set P00.06=1 and use a wire or switch to connect com and DI1,When the switch is closed, the drive run, when the switch is open, the drive stop
2. How to use a float in the water tank to stop the pump if the tank is full?
If your float signal is digital signal Use float switch to short DI 1 and com and P00.06=1
3.Use level probe in the well for protection against dry running?
Set P24.13=30%-40% and P24.14 P24.16 and P23.21
If your float signal is Analog signal, Connect Ai2 and 10V and GND and set P41.00=23 and
P41.03-P41.06
Accessories:
1. GPRS (support 2g/3g/4g internet)
2. LCD keypad
VFD500-PV 22KW 380V inverter picture:
Package:
When power is less than 45kw, we use carton package:
When power is more than 45kw, we use wood case package:
For 220V single phase motor connection
1: Single phase asynchronous motor wiring method (without starting
capacitor):
Notice: U is connected to the common end of the starting winding
and the working winding, V is connected to the starting winding,
and W is connected to the working winding;
Single-phase asynchronous motor if the rotary steering is not
correct, you can change the V and W wiring or set P22.13=1.
First solution: Set parameter P11.01=1 (Single phase motor type without capacitor) or second solution: set P00.11=31 if your motor frequency is 50
hz or set P00.11=32 if your motor frequency is 60HZ
For 220V single phase motor connection
2:Single-phase asynchronous motor wiring method (with capacitor)
Notice1:First solution: Connect motor cable to power terminal U and V and enter BSC mode to
Set parameter P23.15=0(output phase loss shielding protection) or second solution: set macro P00.11=21 if your motor frequency is
50HZ or set P00.11=22 if your motor frequency is 60HZ
