|
[China]
Trade Verify
Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact name:Keira
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd |
|
Verified Suppliers
|
|
|
LED Light Vehicle Barrier Gate Traffic School Hospital Shopping
Mall Boom Barrier
Work with WONSUN
1.Technology servicing is supplied
2. Lifetiom charged servicing is offered.
3. One year's free servicing is supplied( not including the
arm)
The following situations are charged for servicing (or changing):
1. Overdue
2. The surfaces of the system destroyed by wrong installation our
use.
3. Broken by wrong installation.
4. Broken by natural disaster.
5. Broken by improper voltae.
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if
there is any.
The explaining authority of this product instruction and
service article belong to the production factory.
Specifications
Model | DZ-21521 |
Working Temperature | -35℃～+65℃ |
Voltage | 24/100/240VAC, 50/60Hz |
Rated power | 150W |
Relative humidity | ≤90% |
Remote control distance | ≤100m(open, sunny weather) |
Speed | 2.5s-6s |
Boom length | Max 6 meters |
Protection Degree | IP44 |
Function
1. Count (Fleet)
2. ON/OFF control input
3. Wireless remote control
4. Adjustable opening and closing speed
5. When the power is off, the arm is opened and closed manually,
and it is self-locking
6. 24V battery input port
7. Power-off automatic boom function
Communication with customers
1) Q:Connected power and press open/close button,traffic barrier
gate will move but even when it is at right position, the motor
still running and not stop?
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to correct position |
2 | Main controller failure | Change a new one |
2) Q: Motor running but traffic barrier gate
arm no action?
A | Reason | Solution |
1 | Barrier arm at 45° position where is hard to move | Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
2 | Tension of balancing spring not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
