Home Companies Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Servo Motor Heavy Duty Road Barrier Gate 100% waterproof Internal RS 485

Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Contact Us

[China] country

Trade Verify

Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China

Contact name:Keira

Inquir Now

Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Servo Motor Heavy Duty Road Barrier Gate 100% waterproof Internal RS 485

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

 

Servo Motor Heavy Duty Road Barrier Gate 100% waterproof Internal RS 485

 

 

Data sheet 

 

Arm LengthMax6M
Opening And Closing Time0.3S,0.6S,0.9S,3S,4S
Rated VoltageAC100V~AC264V,DC24V
Frequency50Hz~60Hz
Motor Rated Power50W,Max 100W
Working Environment-40 ℃ ~85 ℃
PowerStandby≤8W,run≤100W
Housing Size(H*W*H*W)342*312*959*2mm
LifetimeMore than 10 million operation time or 10 years
MTTR<0.5Hrs
MTBF>500 million operation times

 

Servo motor barrier advanced functions

 

1)More than 50,000 operation times per day

2)Speed adjustable from 0.6s to 4s.

3)When power off, barrier gate will open automatically,no need manual release,Self-detect and work automatically when power on.

4)Motor will NOT getting hot after continuous long run.NO noise when operating

5)Strength can be adjustable for auto reverse to make sure cause less damges on the vehicle.

6)Internal RS 485work with software to connect your computer.

7)Power supply can connect with backup battery or solar power.

8)0.9s can work with 3m straight arm or 3m 90 degree folding arm.

9)Free debugging,maintenance-free.

10)Can be install at both sides,LEFT Or RIGHT.

11)Lifetime warranty for motor, 2 years warranty for rest parts.

 

 

Function Description:

 

1.When Power off, gate automatically open, no clutch design, no need human intervention. When power on, gate automatically reset,

restore to the gate closing state, truly unattended, fire safety standards. If special requirement, manual operation is required when

power off . Operating arm open and close by hand also can be realized by setting up control board DIP switch, which ensure that the system can be used at any time.

2. The use of Single Balance Spring device, good regulation, no noise, indefatigable, not easy to break, safe and reliable.

3. A variety of input and output modes can be selected, normally open normally closed optional.

4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install.

5. Closing speed can be adjusted, 0.9S, 1.3S.

6. Barrier gate up&down signal relay switch output.

7. Barrier gate running state: OK signal output indicating that the gate is working properly.

8. Barrier gate operation abnormal alarm signal output.

9. Traffic light relay switch signal output.

10. External loop detector signal anti-smashing interface, infrared sensor signals anti-smashing interface.

11. Count mode interface.

12. Arm Open priority anti-smashing function, regardless of the current gate in what state, the operator through the triple push button,

software or remote control to issue a gate arm up, the gate will give priority to the implementation of the opening action.

13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing out to avoid damage to the vehicle

and barrier gate machine.

14. Delay down selection function.

15. high sensitivity arm auto reverse function (intensity can be adjusted)

16. Parking system interface

17.RS485 or RS232 network communication control up&down interface (no need to install communication module)

18. Anti-collision alarm signal interface.

19. Arm direction can be changed easily

20. Adjustable speed port (S curve adjustment)

21. High-strength precision cast steel, industry moving parts beyond the industry quality

 

 

Each barrier will include:

 

1 pcs Barrier
1 pcs arm boom (from 1m to 6m can customised)
1 pcs control panel(built inside)
2 pcs remote controllers, 1 pc push button
1 pcs manual book
 
 

 


 

RFQ:

Q: What's the order process?

A: Follow the steps on below to complete your order.

- 1. Inquiry

Provide us detailed information about your requirement, and we'll recommend the suitable products according to your request

-2. Quotation

Official quotation form with all clear specifications according to the order

-3. Invoice

Invoice will be issued once the quotation is confirmed.

-4. Payment

Payment shall be issued once the invoice issued. Full payment is acquired.

-5. Production

Bulk production shall be taking 15-25 working days.

-6. Delivery

by sea, air or courier. Detailed picture of package will be provided upon the service you've chosen. Packaging info will be sent upon confirmation.

 
 
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype:SueZhang729
Whatsapp:+86 15879259831

Hot Products

Servo Motor Heavy Duty Road Barrier Gate 100% waterproof Internal RS 485 Data sheet Arm Length Max6M ...
Automated Road Parking Boom Gates , Serve Motor Boom Gate Barrier high speed Product Display: ...
IP65 24V DC Vehicle Barrier Gate / Security Boom Barrier Brushless Servo Motor Vehicle Barrier ...
Run Speed Adjustable IP65 24V DC Motor PMSM Motor Vehicle Barrier Gate Technical data: arm length: ...
4sec 6mts Loop Detector Vehicle Barrier Gate Automatically Open Data Sheet Open/Close Time 0.6sec 0...
More than 10 Million Operation Times Vehicle Barrier Gate Maintenance-Free Functions and Features 1. ...