Home Companies Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

100% Heavy Duty Vehicle Barrier Gate For Arm Length 1 to 6 Meters

Contact Us

[China]

Trade Verify

Address: 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China

Contact name:Keira

Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

100% Heavy Duty Vehicle Barrier Gate For Arm Length 1 to 6 Meters

Country/Region	china
City & Province	shenzhen guangdong

Product Details

100% Heavy Duty Vehicle Barrier Gate For Arm Length 1 to 6 Meters

Product Introduction

Thanks for you to buy our product.This product uses the new mold designing technology,mold stamping,die casting technology and no clutch designing.And the quality is more reliable.The Mechanism uses the gear worm and crank link structure,and the boom move steady,easy and quick maintenance.

Specification:

Model	DZ-132
Working Temperature	-35℃～+60℃
Voltage	220V±10%, 110V±10%, 50/60HZ
Rated power	80W
Relative humidity	≤90%
Remote control distance	≥30m
Capacitor	9+9uF/450W
Speed	1.8S,3S,6S
Max boom length	5meters
Remote Control	100m in the open place

Function:

1)Open the barrier gate by motor wheel when power off and automatic locking when power on.

2)Balanced boom running with a motor transmission of cranks and shafts.

3)Remote control to operate the barrier gate

4)Infrared photocells connector is avaible.

5)Loop detector connector is available.

6)Well-intergrated with car parking system equipments,with wire control(must be switch signal)

7)Connector for traffic light(AC220v,power less than 40W)

8)Offering dry contact signal for car parking system.(COM,NC,NO)

9)Auto-delay when closing(adjustable)

Motor Speed and Boom Type:

Boom type	Boom Length(M)	Opening time(S)	Height between boom and ground(M)
Straight boom	6M≥L＞4.5M	6S	H=0.8M
	4.5m≥L＞3M	3S
	3m≥L	1.5S
Folding boom 90 degree	5m≥L＞3M	6S
Folding boom 90 degree	3m≥L	3S
Folding boom 180 degree	5m≥L＞3M	6S
Folding boom 180 degree	3m≥L	3S
Fence Boom Two-level	5m≥L	6S	H=0.9M
Fence boom Three-Level	m≥L	3S	H=1.5M

Selection of spring.

Spring type	Diameter	Spring Length
Small size	4.5MM	280MM
Medium size	5.5MM	280MM
Big size	6.5MM	280MM

Our Service :

1. Our Factory has 8 years OEM/ODM experiences in the line of barrier gate .
2. Prompt delivery time. Usually we keep stock of standard model which ensure the prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. Trial order is acceptable. Clients can buy sample and test it before bulk order.
5. Online technical support makes it carefree to be our business partner.
6. A variety of transportation for your choice. Sea shipment, air cargo or express, depends on your demand.
7. Factory can be visited on working days. Clients are warmly welcome to visit our factory.

FAQ:

1. When barrier finish closing, why does the arm open itself slowly?

the spring is too tight, you need release the spring a little, then test it again.
see whether the main crank touch the triangle tightly or not, if tightly, adjust it.
reset the balance position and the electrical limit switch.

2. Why does the controller panel operate with "Di Di Di" abnormal noises?

As for this, it means the resistance on controller board is broken, if you have professional tools to check,
then replace that broken resistance, if not, replace that controller panel.

3. Why does the barrier finish half operation of opening and closing?

If uses our controller panel, you only need to find resistance R37 on controller panel, and repalce it is ok.

4. When barrier closed, why is there a 5 degree angle of inclination?

the model is not good, and the gear doesn't fit each other tightly.
the barrier didn't adjust well, need to reset.

5. When barrier finish open, but it closes itself without any order control, what's the problem?

To check the loop cable first, because the loop cable maybe brokem
To check the motor sensor, if it is not set well, then reset it in the middle between two holes on sensor rod.

6. Why does the arm wave a lot when opening and closing?