Fully Auto Vacuum Emulsifying Mixer Panasonic Transducer FUJI Button

Fully Auto Vacuum Emulsifying Mixer Panasonic Transducer FUJI Button
 

Vacuum Emulsifying Mixer Work theory

After mixing and heating in water and oil pot, the material is sucked to emulsifying pot by vacuum pump. There is a central mixer in the emulsifying machine to mix, tetrafluoroethylene scrapers to scrape material on the pot wall, meantime, the material form new interfaces continuously. Then the material is cut, compressed, mixed and blended by vane and rotary vane and flow to homogenizer at the bottom of pot. Afterwards, material is cut, impacted, crushed to 5-40um(as per customer material) by strong high speed cutting wheel and fixed cutting cover once again. For the emulsifying pot is vacuum, the air produced in the mixing will be vacuumized immediately.

In the traditional production of high viscosity material, especially ointment, grease and emulsion, the finished products’ emulsion are instable or too rough for the big diameter granules and air-in. In order to solve the problems, we designed ZJR series vacuum homogeneous and emulsifying machine, including homogeneous mixer, central mixing vane and scarper, that is the excellent combination. Except that, the machine adopts vacuumizing to avoid air-in, so as to make sure the high quality finished products.

Vacuum Emulsifying Mixer Details

Electric elements: Siemens products
Transducer: Panasonic Company
Button/switch: FUJI Company
Instruments and sensor are home high quality products.
It is possible to adjust and vision mixing speed, temperature of each jar, set upper limit and lower limit of temperature, control automatic valve. It is possible to set the time control for slow speed emulsifies mixing and control performance of lift of hydraulic system.
 
Vacuum Emulsifying Mixer Parameter

· Customized service: to provide and design total solution as per customer URS
Vacuum Emulsifying Machine including:
· Vacuum emulsifying main machine
· Pre-mixing tank for water and oil material
· Vacuum system

Vacuum Emulsifying Mixer machine:

· Slow mixer 0-40rpm with PTFE scraper
· Homogenizer 0-3500rpm (rotor and stator can adjust space)
· Heating by steam or electricity
· Pressure: chamber-0.09Mpa to 0.1Mpa, jacket electrical heating (standard type)
· Upper cover lifting by hydraulic
· Safety limit switch for safety operation
· Upper cover connection: Liquid feed inlet with stainless steel pipe filter, solid material inlet, vacuum inlet, compressed air inlet, breaking vacuum inlet, sight glass, CIP cleaning head, discharging port, dustproof respirator.
 

Vacuum Emulsifying Mixer Parameters