Sino-NSH Oil Purifier Manufacture Co., Ltd |
Verified Suppliers
|
|
Movable Transformer Oil Purifier Remove Moisture Remove Particles 3000 Liter Per Hour
Application of Sino-NSH VFD-50
1. VFD-50 has an oil filtering capacity of 3,000 liters per hour
and can be used for on-site oil filtering and replenishing of
various types of oil-immersed transformers, oil-immersed current
and voltage transformers and high-voltage oil-less circuit
breakers. It can be used for on-site hot oil circulation drying of
the above equipment, especially for on-site hot oil circulation
drying of oil-immersed current and voltage transformers and
high-voltage oil-less circuit breakers.
2. In addition, VFD-50 can also be used for on-site vacuum oil filling
and oil replenishment of sealed oil-immersed equipment, equipment
vacuuming, and regeneration and purification of deteriorated
transformer oil, so that its performance reaches qualified oil
standards.
3. Suitable for power plants, power stations, power companies,
substation industry, metallurgy, petrochemical, machinery,
transportation, railway and other industries.
Double-stage Transformer Oil Vacuum Purifier Features
1. The various indicators of the product are much higher than the
international standard. Compared with the single-stage vacuum oil
filter, its dehydration, degassing, and impurity removal
(mechanical impurities and free carbon) are faster and more
thorough. The point is higher, and the breakdown voltage after
treatment can be increased to better than 75kV.
2. The double-stage vacuum with a high pumping rate can greatly
improve the vacuum environment in the tank to achieve a high
vacuum, the ultimate vacuum is ≤5 Pa and the working vacuum is ≤35
Pa so that the oil temperature remains unchanged during the
treatment process and meets the requirements of the installation.
Or the need for vacuuming the transformer body at the maintenance
site greatly shortens the oil treatment period.
3. Unique degassing and dehydration system, compound
three-dimensional flash evaporation, can quickly remove liquid
water, can effectively remove trace moisture such as dissolved
water, and efficiently complete degassing, dehydration, and
treatment of transformer oil to improve oil quality, and dielectric
strength.
Why should the oil filtration machine be adopted?
After the transformer has been used for a long time, there are gas, moisture, and other impurities will be in the dielectric insulating oil due to the pressure. These factors affect the insulation function and heat dissipation properties of the transformer oil. Therefore, transformer oil filtering must be adopted.
Regeneration Stage
A special decolorizing agent is used to remove the color of dark aged transformer oil and regenerate it into a color similar to that of new oil, and a flexible unloading device is designed with a short time, quick effect, and less consumption. Decolorization in a vacuum state can greatly save the cost of regeneration treatment, and the waste residue does not pollute the environment (it can be used for building walls and paving roads), and is non-toxic and harmless.
Advantages
1. Double-stage vacuum with large pumping speed and advanced
dehydration and degassing system adopts large-area
three-dimensional flash evaporation technology, which can quickly
and efficiently remove moisture, impurities, hydrocarbons, and
other harmful components in the oil, and improve the flash point
and Dielectric strength.
2. It can meet the needs of vacuuming and vacuum oiling the
transformer body at the installation or maintenance site.
3. A sophisticated filtration system, high-quality filter element,
and multi-stage filtration step-by-step encryption can effectively
remove mechanical impurities in the oil.
4. Advanced automatic constant temperature control system,
automatic liquid level control system, automatic defoaming control
system, automatic pressure protection system, and sophisticated
configuration ensure high-performance operation of the equipment.
5. Highly automatic, can be unattended, and the operating status is
displayed by the indicator light.
6. The machine has humanized design, low noise, simple operation,
long maintenance interval, low energy consumption, and low
operating cost.
7. The whole machine is equipped with interlocking safety
protection, and the oil discharge system, vacuum system, and
heating system are interlocked to avoid adverse effects caused by
misoperation.
8. Equipped with leakage and overload shutdown devices to protect
the motor.
Parameter
Parameters | Value | |||||||
VFD-30 | VFD-50 | VFD-75 | VFD-100 | VFD-150 | VFD-200 | VFD-300 | ||
Capacity, liters/hour | 1800 | 3000 | 4000 | 6000 | 9000 | 12000 | 18000 | |
Heating Power, kW | 24 | 30 | 48 | 60 | 90 | 120 | 150 | |
Total Power, kW | 29 | 36 | 56 | 69 | 100 | 132 | 170 | |
Power supply | Fully Customizable | |||||||
Inlet Diameter, mm | 25 | 32 | 32 | 40 | 40 | 50 | 65 | |
Outlet Diameter, mm | 25 | 32 | 32 | 40 | 40 | 50 | 65 | |
Dimensions (without trailer) | length, mm | 1350 | 1500 | 1550 | 1900 | 2200 | 2400 | 2900 |
width, mm | 1100 | 1200 | 1250 | 1400 | 1500 | 1600 | 1800 | |
height, mm | 1700 | 1750 | 1800 | 1800 | 1850 | 1900 | 2000 | |
Weight(without trailer), kg | 600 | 800 | 900 | 1150 | 1500 | 1700 | 2400 | |
Processed Oil Spec | Water Content, ppm | ≤5 | ||||||
Dielectric Strength, Kv | ≥75 | |||||||
Filtration Fineness, um | ≤5( or 1-5 as needed ) | |||||||
Gas Content, % | ≤0.1 |
Our Service
1. 1 years warranty.
2. Provide customers with all technical drawings, materials of equipment purchased, and long-term technical consultation for free.
3. Strictly according to customer needs, provide customers with the best oil treatment solutions, and provide good performance products.
4. Ensure that the equipment is provided with perfect processing technology, perfect testing means, and equipment performance is good.
Other Models Purifier Machines
TF Series: |
TF series oil filter is a filtration and dehydration unit with thermal and vacuum processing, it's ideal for filtration and dehydration of turbine oil, this unit can extend turbine oil life by removing contaminates from oil, such as water, gas, and particulates, improve the oil properties. |
LV Series: |
LV series oil filter is a dehydration and degassing unit with thermal and vacuum processing, it's a multifunctional purifier that can treat various kinds of lubricant oils. |
FV Series: |
LV series oil filter is a stainless steel machine with thermal and vacuum processing, it's mainly used to improve the properties of phosphate ester fire-resistant oil in generator sets. |
GER Series: |
Used oil regeneration system is suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil, and used hydraulic oil, and other used lubrication oil for machinery. |
GED series: |
it is used to recycle all kinds of waste oil into base oil or
diesel oil with high quality. |
Sino-NSH cooperated with SIEMENS in Egypt Programme