UV LED Point Light Source Glue Curing Equipment

UVLED Point Light Source Glue Curing Equipment

Cautions:

1)Do not toggle the switch of UV lamp or main switch while the machine is working.

2)The rotating direction of the fan must be the same as the arrow, or the internal temperature in the machine will get abnormal.

3)Do not change the irradiation distance of UV lamp at will.

4)Check whether the current is normal when the UV lamp is lit as high current may lead to UV lamp failure, and excess voltage may result in damage to transformer.

5)Overheating, voltage higher than rated value, small air emission may lead to fire disaster.

6)Please turn off the main power if any part powers off abnormally while the machine is running, and restart the machine when the trouble is cleared.

7)Please turn off the input power of the machine while inspecting its parts so as to avoid electric shock.

Warnings:

1)Do not look at the UV lamp directly, or it may burn your eyes.

2)Do not let the light shine on the skin for a long time, otherwise it will harm the skin.

3)High voltage is dangerous, do not touch the live parts.

4)Please turn off the main power when the parts are maintained or replaced.

5)Do not touch the moving part so as to avoid danger.