Active Member
|
[China]
Address: BLOCK B 4TH FLOOR BUILDING B HAOYE LOGISTICS ZONE SHUGANG TONGDAO XIXIANG JIEDAO BAO AN DISTRICT SHENZHEN CHINA 518126
Contact name:Shian
Shenzhen Pride Instrument Inc. |
|
|
Metal Digital Depth Gauge
Features:
Manual power on/off.
Zero setting at any position.
Metric/Inch system conversion at any position.
With data output interface
Technical specification:
| Model No. | Range mm/in | Resolution mm/in | Accuracy mm | Bridge mm |
| P4006-150B | 0-150 mm | 0.01 mm | ±0.03 mm | 100 |
| P4006-200B | 0-200 mm | 0.01 mm | ±0.03 mm | 100 |
| P4006-300B | 0-300 mm | 0.01 mm | ±0.04 mm | 100 |
Function:
1. Zero setting at any position.
2. In/ metric system conversion at any position.
3. Through a special cable, the data can be input into a special microprinter.
Working way of the interface : syncjronous series
Data: Binary code, 24 bits,. Each datum wi8ll be sent twice. The cycle is 300ms (pr 20ms in fast reading state).
Transmitting time: 0.5ms.
The four wires ( from left to right) : Negative power (-), clock pulse CP, Data D, Positive Power(+).
Pulse range of data: Datum level≤ 0.2v, level "1" ≥1.3v
Close Pulse CP: 90HZ, effective for high power level.
Instruction:
1. Before using the dgital deoth gauge , clean the surface of the protective sticker with dry and clean cloth ( or soaked with cleaning oil)
2. Never apply voltage on any part of the depth gauge or engrave with an electric pen for fear of damaging the electronics.
3. Turn off the depth gauge by pressing "ON/OFF" button when the depth gauge is not in use. Take out the battery if the depth gauge will stay idle for a long time.
