|
[China]
Trade Verify
Address: Room 1705,Office Building B1,Wanda Plaza,No.2707,Kaichuang Road,Guangzhou,Guangdong,China
Contact name:MileyZhu
Guangzhou Rongtao Medical Tech LTD. |
|
Verified Suppliers
|
|
|
Repair 4D V6-2 IU22/IE33 Cable/Connecting Cable Leakage/Damaged Cable
Cable leakage failure reason and solution
Ultrasound probe cable is adopted by high quality of high
multi-fiber shielded cable, and good workmanship wires, many
hundreds of root, like hair thickness. Due to the bending and
torsion of the cable, it makes outside of reserve cable insulating
layer will be broken, fracture, revealing the inside line,
shielding layer damage, break, corrugated and defect image can be
interferenced.
Other hot models we can repair:
| Brand | Model |
| C5-2(HD11) | |
| C8-4V(HD11) | |
| L12-3(HD11) | |
| S4-2(HD11) | |
| C5-2(IU22) | |
| L9-3(IU22) | |
| L12-5(IU22) | |
| S3-1(IU22) | |
| S8-3(IU22) | |
| C5-1(CX50/EPIQ/Affiniti) | |
| C10-3V(CX50/EPIQ) | |
| L12-3(CX50/EPIQ/Affiniti) | |
| L12-5(CX50/EPIQ/Affiniti) | |
| S5-1(CX50/EPIQ) | |
| S8-3(CX50/EPIQ) | |
| S12-4(CX50/EPIQ) | |
| C6-2(CX50/Affiniti) | |
| C5-2(ClearVue) | |
| C9-4V(ClearVue) | |
| L12-4(ClearVue) | |
| L12-5(ClearVue) |
Common ultrasound Probe Damage(Specialty 3D/4D Volume probes)
| Common ultrasound probe damage | Solutions |
| Lens cap damage | Lens cap replacement |
| Fluid and oil leaks | Lens cap replacement, oil reservoir repair and replacement |
| Cable cuts | Cable patches, possible cable replacement |
| Inoperative steering | Motor repair |
| Connector housing electrical damage | Minor electrical repairs, pin module replacement |
| Weak or dead elements, dropouts in an image | Array ball replacement, oil reservoir repair and replacement |
FAQ
If the probe has a broken membrane or cracked wire, you can see it immediately. But what if the defect is not noticeable?
Ultrasound probes send and receive ultrasonic signals into the body and create an image. If that image has any dropouts, your probe might have defects.
The most commonly occurring problems are related to wiring sheath or membrane. But you can also get a connector refurbishment, crystal replacement, and more.
Tee transducers are particularly expensive ones and usually get bitten by patients. The tiny defects on tee probes are tough to notice.
You can identify the defects by simple monitoring, such as looking for bite marks, corrosive parts, or crushed tubes.
Even a small defect in the Tee probe could be severe for patients. If at all you have a defective tee probe, PRS can lend you one while repairing yours.
