Mitech Ultrasonic Hardness Tester La dureza de ultrasonidos convert
HB HRC HV Measurement scope to meet your needs
Ultrasonic Hardness Tester MU200
Ultrasonic hardness tester is perfect for NDT measurement.Practical
and economical,stable and economical.
Advantages:
- Based on the principle of ultrasonic resonance, no damage to the
workpiece surface, suitable for measuring product with high
requirements of the surface;
- Internal protection circuit makes perfect protection against
interference;
- Mainly used to measure HRC, freely to switch among HB,HV and HRC;
- For detection of different materials,just use the same elastic
modulus or similar material to do the test block to adjust, no need
to replace the probe;
- Built-in rechargeable lithium battery power supply, long
standby;Even if without AC power , measurement can still be done;
- Available for more measurements and calculate the average if
hardness varies;
- No need to set the direction of the probe,just keep the probe
vertical to the surface;
- Optional plats are suitable for small workpiece detection. The
detection speed can be greatly improved;
- Small size, light weight, simple operation, easy to carry;
- Widely used in gears, bearings, all kinds of metal coating (such as
nitriding layer, carburizing layer, plating layer, chrome layer,
etc.), metal sheet, sheet metal, shaped workpiece, immovable large
workpiece, Friction parts, all kinds of molds that need to test the
hardness of the product.
Configuration:
NUM. | Name | QUA. | Tips |
1 | Standard config | Main unit | 1 | |
2 | Probe | 1 | |
3 | Cable | 1 | |
4 | Standard Block | 2 | |
5 | Battery | 1 | Placed in the main unit |
6 | AC adapter | 1 | |
7 | ABS case | 1 | |
8 | Booklet | 1 | |
9 | Optional config | B-Probe | 1 | Other customized probes are also available. |