Active Member
|
[China]
Address: Room E506, YingChuangDongLi Park, 1# of ShangDi East Road, Haidian District, Beijing, China
Contact name:Lareina Lee
Mitech CO.,LTD. |
|
Mitech CJX-A Magnetic Particle Flaw Detector of Magnetic Particle Testing
Product Overview
MITECH CJX-A multifunctional magnetic flaw detector is the self-designed multifunctional magnetic flaw detector absorbed the advantages of similar products at home and abroad. With small size, light weight, easy operation, multifunction in one unit. The detector can equip A, D, O three types of probes to realize the functions of magnetic clamp detection, electromagnetic yoke detection, ring detection. It is the necessary detector to do flaw testing, quality control, safety check, life evaluation in the fields of petrol, chemicals, metallurgy, shipbuilding, aviation, railway etc..
Configuration
| Configuration | No | Parts name | Type | QTY |
| Standard config | 1 | Main unit | CDX-Ⅲ | 1 |
| 2 | Type A magnetic yoke probe | 1 | ||
| 3 | Magnetic yoke line | 1 | ||
| 4 | Cable line | 1 | ||
| 5 | User’s manual | 1 | ||
| Optional config | 6 | Type D magnetic yoke probe | 1 | |
| 7 | Type O magnetic yoke probe | 1 |
Working Principle
Magnetize, put the workpiece into high-intensity magnetic field, connect electric to make it magnetized, if there are flaws (crack,slag) in or near the surface, there will be a leakage around the flaws. Put good quality magnetic powder(usually the magnetic iron oxide powder)on the object, magnetic powder will gather together near the leaked magnetic field, piled up to form visible traces of magnetic powder
Working Conditions
Power: AC 220v
Avoid strong vibration, place in dry area.
Make sure the connection condition is well, release the key when the probe leaving the workpiece. use oi to lubricate the turning joint.
Instrument Attention
Try to avoid unplugging the cable when using.
Use soft cloth to clean the detector.
Avoid strong vibration, place in dry area.
When not using for a long time, you should charge it every three months to avoid damping the components.
After turning off the detector for 5s, boot again, do not boot immediately.
Make sure the connection condition is well, release the key when the probe leaving the workpiece. use oi to lubricate the turning joint.
