Active Member
|
[China]
Address: Room E506, YingChuangDongLi Park, 1# of ShangDi East Road, Haidian District, Beijing, China
Contact name:Lareina Lee
Mitech CO.,LTD. |
|
|
MITECH X-Ray Flaw Detector XXH-2505 with glass tube circumferential cone target
Introduction
MITECH inflatable X ray generator is a portable X-ray flaw detector for X ray nondestructive testing. With strong anti-interference ability, good stability, reliable operation, it has obvious advantages in the construction and high-altitude operations, is widely used in shipbuilding, machinery manufacturing, aviation, railway, pressure vessels, boilers, oil, Chemical industry, national defense industry and other industries, is the ideal equipment for nondestructive testing.
Mitech focus on non-destructive flaw detector R & D, production, sales. Please don't worry. All of products have high quality.
Glass Tube Circumferential Target Series
| Model | Output voltage(KV) | Capacity(kW) | Focus dimension(mm×mm) | Radiation angle | Maximum penetration(Q235) | Generator weight(kg) | Generator dimension(mm×mm×mm) |
| XXH-1605 | 60-160 | >1.5 | 1.0×2.0 | 360°×25° | 18 | 15 | 220×220×630 |
| XXH-2005 | 80-200 | >2.0 | 1.0×2.4 | 360°×25° | 27 | 23 | 280×280×680 |
| XXH-2505 | 130-250 | >2.5 | 1.0×2.4 | 360°×25° | 37 | 33 | 320×320×750 |
| XXH-3005 | 150-300 | >3.0 | 1.0×3.4 | 360°×25° | 47 | 40 | 320×320×840 |
Standard Configuration
| NO. | Name | QTY | Remarks |
| 1 | X ray flaw detector | 1 | |
| 2 | controller | 1 | |
| 3 | Connection cable(10 cores) | 1 | |
| 4 | Power cable(2 cores) | 1 | |
| 5 | Ground lead | 1 | |
| 6 | Fuse(3A) | 5 | |
| 7 | Attached files | 1 |
Working Conditions
| Environment temperature | -25℃-40℃ |
| Relative humidity | no bigger than 85% |
| Safe work pressure | 0.35-0.50mPa |
Note, Do not use when the pressure is under 0.35mPa
The Emission of X-ray
Figure 1 Figure 2
Figure 3 Figure 4
Figure 1:Glass tube circumferential target generator
Figure 2:Ceramic tube directional generator
Figure 3:Glass tube circumferential cone target generator
Figure 4:Glass tube directional generator
Generator Structure
1 Gas pressure gauge 2 Cable line socket
3 Caution light 4 X ray generate area
5 Cooler fan
1 Fault code and exposure chart 2 Standby light 3 HV light
4 Digital display 5 Time knob 6 KV presetting knob
7 “HV on” key 8 “HV off” key 9 Power switch 10 Connection cable socket 11 Power cable socket 12 Earthing wire
13 Fuse holder(3A)
The main parts in the controller are:KV control panel, mA control panel, microcomputer control panel, protection board, Controllable silicon high voltage module, LC filter, main,assistant silicon control inverter system. The inner controller has cooling fans, vent-windows on the side and back.
