Active Member
|
[China]
Address: Room E506, YingChuangDongLi Park, 1# of ShangDi East Road, Haidian District, Beijing, China
Contact name:Lareina Lee
Mitech CO.,LTD. |
|
|
MITECH Industrial NDT RT Testing Panoramic X-Ray Flaw Detector XXHA-2005 Testing Machine
Product Overview
The X-ray Flaw Detector can be widely used in shipbuilding, machinery manufacturing, aviation, pressure vessels, boilers, oil pipe, chemical, defense industry and other departments for non-destructive testing. X-ray Flaw Detector is suitable to construction site operation and factory lab operation.
Glass Tube Circumferential Cone Target Series
| Model | Output voltage(KV) | Capacity(kW) | Focus dimension(mm×mm) | Radiation angle | Maximum penetration(Q235) | Generator weight(kg) | Generator dimension(mm×mm×mm) |
| XXHA-1605 | 60-160 | >1.5 | 1.0×2.5 | 360°×40° | 15 | 15 | 220×220×630 |
| XXHA-2005 | 80-200 | >2.0 | 1.0×2.5 | 360°×40° | 24 | 23 | 280×280×680 |
| XXHA-2505 | 130-250 | >2.5 | 1.0×2.5 | 360°×40° | 34 | 33 | 320×320×750 |
| XXHA-3005 | 150-300 | >3.0 | 1.0×3.5 | 360°×40° | 40 | 40 | 320×320×840 |
Working Conditions
Environment temperature: -25℃-40℃
Relative humidity: no bigger than 85%
Safe work pressure: 0.35-0.50mPa
Note, Do not use when the pressure is under 0.35mPa
The Emission of X-ray
Figure 1 Figure 2
Figure 3 Figure 4
Figure 1:Glass tube circumferential target generator
Figure 2:Ceramic tube directional generator
Figure 3:Glass tube circumferential cone target generator
Figure 4:Glass tube directional generator
Generator Structure
1 Gas pressure gauge 2 Cable line socket
3 Caution light 4 X ray generate area
5 Cooler fan
X ray generator combination, X ray tube, high voltage transformer and the insulation gas packaged together in bottled aluminum shell. Warning lights indicates the flaw detection system is in the ready state, and there will be x rays, during the production of X ray, warning light.
Controller Structure
1 Fault code and exposure chart 2 Standby light
3 HV light 4 Digital display
5 Time knob 6 KV presetting knob
7 “HV on” key 8 “HV off” key
9 Power switch 10 Connection cable socket
11 Power cable socket 12 Earthing wire
13 Fuse holder(3A)
The main parts in the controller are:KV control panel, mA control panel, microcomputer control panel, protection board, Controllable silicon high voltage module, LC filter, main,assistant silicon control inverter system. The inner controller has cooling fans, vent-windows on the side and back
