Results forul507 standard test finger probefrom 50512 Products.
|
Wedge Probe For Document Shredder The wedge probe is one of two new accessibility probes required by UL 60950 for paper shredders. UL found that children and small women could ...
|
|
|
|
Product Details Product information: The stirrer shall incorporate a biased-off switch that is recessed or guarded to prevent accidental operation. It conforms to the IEC60335-2-14 ...
china
|
|
|
|
Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of ...
|
|
|
|
iec 60529 IP2X code jointed test finger probe Model TP02 iec 60529 IP2X code jointed test finger probe Test Probe is intended to verify the protection of person aganist access to ...
china
|
|
|
|
IEC60065 Test Hook for Audio and Video Made by 304 Stainless Steel 1. Introduction The test hook is designed according to IEC60065 clause 9.1.7 and figure 4. It is mainly applied ...
|
|
|
|
IEC 60335-1 Standard Test Probe B for Protection Against Access to Hazardous Parts Standards & Clauses: IEC 60335-1 clause 8.1.1, 8.2, 22.1, 29.1, 29.2.etc. IEC61032:1997 ...
|
|
|
|
Rigid Finger 1 Ø50mm, 20mm wide, 100mm long
|
|
|
|
UL982 Probe For Uninsulated Live Parts And Film-Coated Wire Length 101.6mm Diameter 19.1 Description in UL982 2009 Clause 58.9.2: In the enclosure of an appliance other than as ...
|
|
|
|
UL Standard Articulated Test Finger Probes Model TPU1: UL Standard Articulated Test Finger Probes This is the “UL” test finger, researched and designed by UL and required by most ...
china
|
|
|
|
Steel Test Pin with Nylon Handle as Per BS1363-1 Figure 1 1. Introduction The test pin meets the requirements of BS1363-1 clause 12.6.1 and figure 1.The test pin meets the ...
|
|
|
|
IEC 60529 Test Sphere50mm , IP1X This probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
IEC60335-2-24 Figure 102 Scratching Tool Tip Product information: The scratching tool tip is for home appliances whose accessible element surface of all protected cooling system, ...
|
|
|
|
rigid test finger probe,iec testing,test finger probe,access safety test Model TP11: rigid test finger probe,iec testing,allied testing rigid test probe is used to assess ...
china
|
|
|
|
Abration Resistance Test Pin Made by Hardened Steel Conforms to IEC60950 1. Introduction The scratch resistance test uses a hardened steel pin for scratching. The end of the steel ...
|
|
|
|
Antenna coaxial sockets mounted on the apparatus Antenna coaxial sockets mounted on the apparatus and incorporating parts or components which isolate HAZARDOUS LIVE parts from ...
|
|
|
|
iec en astm as nzs test probe,rigid test finger probe Model AT TP11: iec en astm as nzs test probe,rigid test finger probe rigid test probe is used to assess protection of persons ...
china
|
|
|
|
IEC60335-2-80 Figure 102 Test Pin for Testing the Fan 1. Introduction The test pin is completed designed according to IEC60335-2-80 figure 102, it is to simulate the bolt of fan. ...
|
|
|
|
IEC 60529 Test rod 2.5mm, IP3X Usage This wire is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against ...
|
|
|
|
UL jointed test finger probe Model TPU1: UL jointed test finger probe This is the “UL” test finger, researched and designed by UL and required by most UL Standards. Palm simulator ...
china
|
|
|
|
Test Needle Diameter : Ø0.5mm or Ø1mm, Length : 20mm
|
|
|