Tongxiang Shineknot Lighting Co., Ltd. |
|
LED COB GU10 3W 110V Dimmable Spotlight Build-in Driver Full
Transparent Glass Wholesale 3 years warranty Package custom
Product Parameter:
Model: SKLEDSL-608-3W
Power: 3W
Size: 56*50mm
Base: GU10
Chip: COB
Efficiency: >90lm/w
Color Temperature: 3000K Warmwhite
4000K Day
White
6000K Cold
White
CRI: >80 Normally >90 Also available
Voltage: 85V-265VAC Non-dimmable
220VAC Dimmable
110VAC Dimmable
Please tell us your voltage choice when place order.
Application Of LED SpotLight:
COB LED Spotlight bulbs measure just under 4 inches in
diameter allowing them to fit into 4 inch recessed can lights and
spotlight fixtures too small .
Short neck bulbs are specially designed for shallow fixtures, so
these are often used for track lighting.
Some bulbs are UL listed for wet locations, meaning they can
be used outdoors and do not require protection from direct exposure
to water.
Look for the Safety Rating in the Specifications of each product
page if this is important to you.
Many of the bulbs are also dimmable when paired with a compatible
LED dimmer.
Because not all Spotlight LEDs work with all LED dimmers, each bulb
has a Dimmer Compatibility PDF under Brochures and Spec Sheets so
that you can make sure your new lights will work with your existing
dimmers.
Need some help finding the right product for your installation?
Give one of our lighting experts a call. We'll be happy to walk you
through all of your options.
Features of LED GU10 SpotLight:
1. GU10 LED bulbs are an energy efficient replacement for
halogen bulbs.
To help you find the right replacement, the category
is broken out by halogen wattage equivalent.
While the up-front cost of LEDs is higher than halogen
bulbs, they need to be replaced far less frequently.
With halogen bulbs only lasting 1500 to 2000 hours,
an LED Spotlight that lasts 35,000 hours is a worthy investment.
You would need to replace a halogen 17-23 times
before replacing one LED bulb.
2. LED Lights Short Neck LED Beam Angles and Color
Temperature
shaped bulbs are often used for more controlled
directional lighting compared to BR shaped bulbs or for general
illumination.
3. GU10 short neck LEDs give you a wide range of options
categorized as follows:
Narrow Spot: less than 10 degree beam angle
Spot: 12/24/36 degree beam angle
Narrow Flood: 25 degree beam angle
Flood: 36 degree beam angle
Wide Flood: greater than 50 degree beam angle
4. Color temperature is a measure of how yellow or blue a
light the bulb puts out.
This is another advantage of using LED lighting over
halogens, which can only produce light in the 3000 Kelvin range.
LEDs give you more flexibility to choose how
warm or cool a light to use in your displays.
Higher Kelvin temperatures appear crisper,
brighter, and are on the blue end of the Kelvin scale.
Lower Kelvin temperatures are warmer, closer to the light
output from a halogen or incandescent bulb.
A 3000 Kelvin is the closest direct replacement for halogen
if you want to keep that familiar look.
We recommend 3000 Kelvin and lower for landscape lighting because
flowers, grass, and trees will look unnatural under the higher
Kelvin light while it matters less for statues and stonework.
For display lighting or track lighting, higher temperatures may be
used, but we recommend sticking to the lower Kelvin bulbs for
recessed lighting or ambient lighting.
5. High CRI Bulbs
Another measurement that changes the appearance of the light from
your bulbs is CRI, a measure of how accurately a light bulb
displays colors compared to the midday sun.
LED PAR Light SMD Bulbs with a higher CRI provide a more vivid
light, especially reds and flesh tones.
Although LEDs cannot yet match the 100 CRI of halogen bulbs, a CRI
of 90 or above is considered
e
Maintenance / Repairing Instructions:
1.Make sure LED GU10 Light has been turned off before
maintenance or repairing.
2.Clean the LED COB spotLights cover regularly to
maintain high transmission of light.
3.Clean up the LED GU10 Spot Lamp dust from the cover and
heatsink regularly to keep sound heat dispersion.
4.Be careful not to use water or corrosive solution for cleaning
LED 3W GU10 Full glass Light, preferably with a dry cloth.(It
is not Waterproof tubes,These LED Lights IP40, forbit to use
with rainy or water).