Active Member
|
[China]
Address: 103, 1st Floor, Building A, Jinfeng Industrial Park, No. 8 Songlin West Road, Zengtian, Xin'an Community, Chang'an Town, Dongguan City, China
Contact name:weili
TAKDA PRECISE MOULD FACTORY |
|
|
Custom Precision Plastic Bottle Cap Agitator Molds And Finished
Products
bottle cap mold Information:
| Mold information | content |
| Product Material | ABS,PP,PC,PA,PMMA,PS,POM and etc. |
| Moldbase | FUTABA,LKM,HASCO,DME you can choose |
| Cavity material | 45#,50#,P20,H13, 718 2738, NAK80, S136, SKD61 etc |
| Runner | Cold/Hot runner |
| Cavity | Multi or single cavity |
| Gate type | Side gate,Sub gate,Pin point gate,Edge gate etc |
| Treatment | Heat treatment and Nitriding,polish ect. |
| HRC | H45~52 |
| Product weight | 50~5000 K |
| Machine type | 130ton-550ton |
| The standard of appearance of the products for stripe | MT(Mold Tech),YS,HN series |
| The way of Color contrast | RAL K7,PANTONE |
Detail information of bottle cap mold mould steel
| Mould material | mould hardness | mould life |
| P20 | HRC 29-33 | 300000 shot |
| H13 | HRC >43 | 1000000 shot |
| 718 | HRC 30-36 | 500000 shot |
| S136 | HRC 48-52 | 50000 shot |
| 2344 | HRC >48 | 800000 shot |
Advantage
1. Near-net shape products can be manufactured through molds.
2. Suitable for materials that are difficult to process.
3. Quick installation system can not only reduce the time to
install the mold, but also reduce the damage rate of the mold
4. Usually, multiple air holes are embedded in the product, and the
visible density is lower than the true density, which reduces the
weight of the product.
5. Use lubricating oil by using air holes. No oil supply is
required.
Product Description
| Mould Shaping | injection mold |
| De-mould Type | Automatic Eject (Ejector pin, Air gate, Ejector plate, Hydro-cylinder, etc) |
| Mould material | NAK80, S136, 2316, 2738, H13, 5CrNiMo, 718H, P20, 40Cr, 60#, 45# etc |
| Mould base | 45#,S50C,LKM,etc. |
| Mould Cavity | Single or multi |
| Sprue Gate | Hot runner, Cold runner, Pin-point gate, Submarine gate, etc |
| Design software | UG, PROE, CAD, CAXA, ect. |
| Plastic material | PP, PC, PS, PE, PU, PVC, ABS, PMMA, ect. |
| Mould life | 300,000-3,000,000 shots |
| Delivery time | 45-75 days |
| Payment Terms | T/T or L/C |
| Packaging | Wooden Cases |
| Transportation | By Sea or by air |
| Export Country | worldwide |
| Specification | Depends on customer's requirements. |
| OEM order | welcome |
