Active Member
|
[China]
Address: LONGHUA,SHENZHEN,CHINA
Contact name:Sales Manager
Shenzhen First Technology Co., Ltd. |
|
|
| Model/Name | R10-disc carbon road Frame+Fork+Seat post+Headsets+Lever |
| Size(Height) | 46cm / 48cm / 50cm / 52cm / 54cm |
| Material | High modulus Carbon fiber(T800) |
| Aplicated wheel size | 700*25C |
| BB | BB86*46 Pressed |
| Head tube | 52*52&Cover |
| Decals | UV laser colorful decals |
| Process | Aero-design, EPS, Inner-Cables, Gloss,UV laser colorful decals |
| Weight | About: Frame 1.12KG, Fork 0.36KG, Seat post 0.24KG(Depends on Size) |
| Color | Red /Yellow/ Blue/ Orange /CementGray /Silver/ Black /BlackRed /WhiteRed |
Different viewing angle
EPS Technology on TWITTER Carbon Road Bike frame
The mandrel made of a thermoplastic material made of polystyrene compound conforming to the inner diameter of the frame is used as the basis for the production of the frame. If the stability of the overall quality of the frame can be enhanced, the internal wrinkles are prevented to increase the rigidity. In the market's pursuit of a highly rigid ultra-light frame, this technology can greatly extend the life of the frame and improve its safety. In the production process, the carbon fiber layer is coated on the EPS, and the mandrel is pulled out after being stabilized by molding. If the technology of TPM (thermoplastic layer technology) can be further combined, the ultra-light frame can be maximized. Good security effect.
The use of EPS technology for carbon fiber products offers the
following advantages:
1. Has a sturdy carbon fiber casing, making the frame durable and
sturdy, and light in weight
2. Has a positive strength to weight ratio, strength and shock
absorption properties make it effective for the frame
3. Reduce the excessive stress concentration inside the frame
4. Stabilization and smoothness between the laminates in the inner
layer of the frame and the joint
5. The finished frame has a bright and smooth appearance.
6. The finished frame has high hardness, good toughness, good
strength and good adhesion.
7. The finished product of the frame has a long service life and
stable quality.
