Active Member
|
[China]
Address: No. 7 Factory Building , Maqiao Industrial Square, CEDZ, Jiangsu China
Contact name:Glenn
Changshu Flex-Tek Thermal Fluid Systems Manufacturer Co., Ltd. |
|
|
| Model Number | TM-DD |
| Dimension(L*W*H) | Customized |
| Weight | Customized |
| Voltage | Customized |
| Power(W) | Customized |
| Certification | CE,RoHS |
| Temperature endurance | 100-1200 degree |
| Power | 100-8000W |
| Sheath Material | SUS 304/316/321 Incoloy 840 |
| Dimension | made to order |
| Product Keywords | mini cartridge heater |
1. Cartridge heater consists of a cylindrical stainless steel tube and thus prevents itself from corrosion. The watt density can reach 25 W/cm2and the operating temperature can go up to 800°C (1472°F)
2.The cartridge heater is filled with magnesium oxide and compressed to avoid short-circuit. There is a heating wire inside which is wound into a ceramic core. The number of coils varies depending on the power.
3. Various cartridge heaters are available. We develop and manufacture cartridge heaters according to your special demands.
Cartridge Heater Specifications:
| Diameter | 3mm to 30mm, etc. |
| Length | Customized |
| Wire length | Customized |
| Leads type | Direct line, SUS 304 braided, metal hose, etc. |
| Voltage Supply | 12V to a maximum of 480V |
| Total capacity | customized |
| Resistance Tolerance | +10% - 5% (closer tolerances are available upon special request) |
| Heating length | Customized |
| Sheath Material | SUS 304/316/321 Incoloy 840 |
| Insulation material | Magnesium Oxide Powder |
| Maximum Temperature | 800 °C |
| 1. Food processing |
| 2. Plastic moulds |
| 3. Medical equipment |
| 4. Hot stamping |
| 5. Liquid immersion |
| 6. Packaging equipment |
| 7. Nuclear industry |
| 8. Labeling & Sealing |
9. Dies & platens |
| 10. Injection molding |
| 11. Car industry |
