Active Member
|
[China]
Address: No. 7 Factory Building , Maqiao Industrial Square, CEDZ, Jiangsu China
Contact name:Glenn
Changshu Flex-Tek Thermal Fluid Systems Manufacturer Co., Ltd. |
|
|
Customed Compressed Air Cartridge Tubular Heater Element
1, We can produce all kinds of cartridge heater,pencil heater ,air
cartridge heater ,wax cartridge heater ,ceramic heater and so on
2, Main material: stainless steel
3, High Density
Single end electric tube heater for single-end high-capacity electric heating elements,and generally be used toheat mold.
Mostly used for heating up solids such as injection presses heating plates or various tools, heating up water of gases under certain conditions, manufacturing plastic and rubber parts in the car industry or in the food processing industry, chemical, electronics, medical equipment, packing and nuclear industries.
Technical Detail:
1 Tube diameter: Φ3mm-Φ30mm
2 Tube Material:SS304;SS316,SS321,NICOLOY800 etc
3 Insulation Material:High-purity Mgo
4 Reisistance wire element:Ni-Cr or FeCr
5 Lead Connection Option: Crimped or Swaged leads
6 Lead and type of connection leads, 10" Fiberglass Standard(Wire options,silicone high temperature frberglass).
| Heat intensity | Not exceeding 30Wcm2 (advisable) |
| Power | Depends on the dimension |
| Escape of current (when cold) | <=0.1mA a 242 v. |
| Insulation (when cold) | 5 Min Ohmios 500 Watts minimum |
| Dielectric strength | 1500v. 1/seg |
| Working temperature | 750ºG max. |
| Tolerance of length | +/-1.5% |
| Tolerance of diameter | -0.01 a -0.06 m/m |
| Tolerance of cut of connexion | +/-15 mlm |
| Power tolerance (w) | 5 % - 10 % |
| Cold areas | Depends on length and diameter 5-25mm |
Various cartridge heater technologies are available.
We can customize according to your requriements.
