Home Companies Zhuzhou TGC Cemented Carbide Co.,Ltd.

Sintered Tungsten Carbide Rod With Straight Hole Nano Grain Size H6

Contact Us

[China]

Trade Verify

Address: Block B, building 4, Area B, Hi Tech New Makin Valley Xiangyuehuan Road, Tianyuan District, Zhuzhou, Hunan, China

Contact name:Ms Pan

Zhuzhou TGC Cemented Carbide Co.,Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Sintered Tungsten Carbide Rod With Straight Hole Nano Grain Size H6

Country/Region	china
City & Province	zhuzhou hunan
Categories	Aluminum Alloy

Product Details

Nano Grain size tungsten carbide one straight hole rods for machining stainless steel

ISO K05-k10

Cobalt: 9% , other WC 91%

Outer diameter 16mm +0.2/+0.5

Inner diameter: 2.0mm ±0.15

Length: 150mm 0/+0.2-0.7mm

Surface roughness: Finished ground Ra0.2

Application: Nano grain size, hardness can be up to HV30 1920. used to make drills and end mills for general purpose, such as heat-resistant alloy, cast iron.

Recommended Carbide grade

Classification	K05-K10
Co %	9
WC incl. doping	91
Density g/ cm3	14.35
Hardness HV30	1920
Fracture toughness	9.3
Transverse rupture strength	3800
Average grain size	0.2

Regular size for one central hole carbide rods:

Outer Diameter mm		Inner Diameter mm		Length mm
OD	Tol.	ID	Tol.	Length	Tol.
2.50	+0.2/+0.5	0.3	±0.1	330	0/+5.0
4.00	+0.2/+0.6	1.0	±0.15	330	0/+5.0
5.00		1.0	±0.15	330	0/+5.0
5.00		1.5	±0.15	330	0/+5.0
6.00		1.0	±0.15	330	0/+5.0
6.00		1.5	±0.15	330	0/+5.0
8.00		1.0	±0.15	330	0/+5.0
8.00		1.5	±0.15	330	0/+5.0
9.00	+0.3/+0.7	1.0	±0.15	330	0/+5.0
10.00		1.0	±0.15	330	0/+5.0
10.00		2.0	±0.2	330	0/+5.0
11.00		1.0	±0.15	330	0/+5.0
12.00		1.0	±0.15	330	0/+5.0
12.00		2.0	±0.2	330	0/+5.0
14.00		2.0	±0.2	330	0/+5.0
16.00	+0.4/+0.8	2.0	±0.2	330	0/+5.0
16.00		3.0	±0.25	330	0/+5.0
18.00		3.0	±0.25	330	0/+5.0
20.00		3.0	±0.25	330	0/+5.0
22.00		3	±0.25	330	0/+5.0
24.00		4	±0.30	330	0/+5.0
25.00		5	±0.35	330	0/+5.0

Regular size for two straight coolant holes carbide rods:

Outer Diameter mm		TK mm		Inner Diameter mm		Deviation of holes position≤(mm) a	Length mm
OD	Tol.	TK	Tol.	ID	Tol.	Deviation of holes position≤(mm) a	Length	Tol.
4.30	+0/+0.3	1.8	-0.4/0	0.800	±0.1	0.15	330	0/+5.0
5.30		2.0	-0.4/0	0.800	±0.1	0.20	330	0/+5.0
6.30		3.0	-0.5/0	1.000	±0.15	0.20	330	0/+5.0
7.30		3.5	-0.5/0	1.000	±0.15	0.20	330	0/+5.0
8.30		4.0	-0.6/0	1.000	±0.15	0.20	330	0/+5.0
9.30		4.0	-0.6/0	1.400	±0.15	0.20	330	0/+5.0
10.30		5.0	-0.6/0	1.400	±0.15	0.20	330	0/+5.0
11.30	+0/+0.4	5.0	-0.6/0	1.400	±0.15	0.28	330	0/+5.0
12.30		6.0	-0.6/0	1.750	±0.15	0.30	330	0/+5.0
13.30		6.0	-0.6/0	1.750	±0.15	0.34	330	0/+5.0
14.30		7.0	-0.6/0	1.750	±0.15	0.37	330	0/+5.0
15.30		8.0	-0.6/0	2.000	±0.2	0.37	330	0/+5.0
16.30		8.0	-0.6/0	2.000	±0.2	0.40	330	0/+5.0
17.30	+0/+0.6	9.0	-0.6/0	2.000	±0.2	0.47	330	0/+5.0
18.30		9.0	-0.6/0	2.000	±0.2	0.50	330	0/+5.0
19.30		9.0	-0.6/0	2.000	±0.2	0.50	330	0/+5.0
20.30		10.0	-0.8/0	2.500	±0.25	0.50	330	0/+5.0

General Tolerance for ground carbide rods

General tolerance for the h6 finished ground solid carbide rods
Diameter	Tolerance μm	Length	Tolerance	Straightness	Tolerance	Circularity	Tolerances
＜3.0	-6/0	＜100.0	+0.5/+1.0	＜4.0	0.07	<3,0	2,0 micron
3.0-6.0	-8/0	100.0-165.0	+1.0/+2.5	4.5-5.0	0.06	3,0- 6,0	2,5 micron
6.0-1.0	-9/0	165.0-335.0	+1.0/+6.0	5.5-12	0.05	6,1-10,0	3,0 micron
10.0-18.0	-11/0			＞12.5	0.04	10,1-18,0	3,5 micron
18.0-30.0	-13/0					18,1- 30,0	4,0 micron
30.0-50.0	-16/0					30,1- 50,0	5,0 micron

Our tungsten carbide rods:

100% virgin material, no recycled material
Spray drying tower and HIP sintering furnace
Constant excellent quality
Large stock for all sizes, the regular products can be shipped in 3 days, and the special rods can be ground in one week.
100% inspected before delivery. The inspection including raw material and dimension report will be sent you before delivery
Excellent grinding quality, Straightless and circularity could be 0.05 or 0.02.

Carbide grades

What we can provide

Hot Products

Dia 6.3mm Tungsten Carbide Rod With Straight Hole 7.5% Cobalt Bar

Tempered cast iron endmills blank tungsten carbide rods with straight hole ISO K10-K30 Cobalt: 7.5% ...

HV1690 Tungsten Carbide Rod With Straight Hole 12% Cobalt 12mm Diameter

12% Cobalt with high hardness HV1690 tungsten carbide rods with straight hole Outer diameter 12mm +0...

Tungsten Carbide Rods With Straight Coolant Holes 15% Cobalt OD 0.619"

High Kic 13.2 Tungsten carbide straight hole rods OD0.619" Length12.425" ISO K30-K40 Cobalt: 15% ...

Sintered Tungsten Carbide Rod With Straight Hole Nano Grain Size H6

Nano Grain size tungsten carbide one straight hole rods for machining stainless steel ISO K05-k10 ...

OD 20mm One Central Straight Hole Carbide Rod K20 - K40 For Making Endmills

OD20mm K20-K40 carbide rods with one central straight hole rod for making endmills Outer diameter ...

Cemented Carbide Rod With Straight Hole OD 8mm For Drilling Blanks

OD8mm cemented carbide rods with straight hole rods for drilling blanks Specifications: Outer ...

Related Products