Home Companies Zhuzhou TGC Cemented Carbide Co.,Ltd.

KIC 11.3 Tungsten Carbide Rod Blank 10% Cobalt With Two Coolant Holes

Contact Us

[China]

Trade Verify

Address: Block B, building 4, Area B, Hi Tech New Makin Valley Xiangyuehuan Road, Tianyuan District, Zhuzhou, Hunan, China

Contact name:Ms Pan

Verified Suppliers

0.223" With 12.425" Long Tungsten Carbide Rods Blank W 2 Coolant Holes

ISO K20-K40

Cobalt: 12%

Outer diameter 0.223"

Inner diameter: 0.039"

Length: 12.425" or fixed length as per request

Surface roughness: Raw sintered Ra 6.3 or as required

Application: the special high-performance grade for the roughing of titanium and heat-resistant alloys.

Grade datasheet:

For more grades details, please kindly check the general datasheet in the following details:

Regular size for one central hole carbide rods:

Outer Diameter mm		TK mm		Inner Diameter mm		Deviation of holes position≤(mm) a	Length mm
OD	Tol.	TK	Tol.	ID	Tol.	Deviation of holes position≤(mm) a	Length	Tol.
4.30	+0/+0.3	1.8	-0.4/0	0.800	±0.1	0.15	330	0/+5.0
5.30		2.0	-0.4/0	0.800	±0.1	0.20	330	0/+5.0
6.30		3.0	-0.5/0	1.000	±0.15	0.20	330	0/+5.0
7.30		3.5	-0.5/0	1.000	±0.15	0.20	330	0/+5.0
8.30		4.0	-0.6/0	1.000	±0.15	0.20	330	0/+5.0
9.30		4.0	-0.6/0	1.400	±0.15	0.20	330	0/+5.0
10.30		5.0	-0.6/0	1.400	±0.15	0.20	330	0/+5.0
11.30	+0/+0.4	5.0	-0.6/0	1.400	±0.15	0.28	330	0/+5.0
12.30		6.0	-0.6/0	1.750	±0.15	0.30	330	0/+5.0
13.30		6.0	-0.6/0	1.750	±0.15	0.34	330	0/+5.0
14.30		7.0	-0.6/0	1.750	±0.15	0.37	330	0/+5.0
15.30		8.0	-0.6/0	2.000	±0.2	0.37	330	0/+5.0
16.30		8.0	-0.6/0	2.000	±0.2	0.40	330	0/+5.0
17.30	+0/+0.6	9.0	-0.6/0	2.000	±0.2	0.47	330	0/+5.0
18.30		9.0	-0.6/0	2.000	±0.2	0.50	330	0/+5.0
19.30		9.0	-0.6/0	2.000	±0.2	0.50	330	0/+5.0
20.30		10.0	-0.8/0	2.500	±0.25	0.50	330	0/+5.0

General tolerance for the h6 finished ground solid carbide rods
Diameter	Tolerance μm	Length	Tolerance	Straightness	Tolerance	Circularity	Tolerances
＜3.0	-6/0	＜100.0	+0.5/+1.0	＜4.0	0.07	<3,0	2,0 micron
3.0-6.0	-8/0	100.0-165.0	+1.0/+2.5	4.5-5.0	0.06	3,0- 6,0	2,5 micron
6.0-1.0	-9/0	165.0-335.0	+1.0/+6.0	5.5-12	0.05	6,1-10,0	3,0 micron
10.0-18.0	-11/0			＞12.5	0.04	10,1-18,0	3,5 micron
18.0-30.0	-13/0					18,1- 30,0	4,0 micron
30.0-50.0	-16/0					30,1- 50,0	5,0 micron

Our tungsten carbide rods:

100% virgin material, no recycled material
Spray drying tower and HIP sintering furnace
Constant excellent quality
Large stock for all sizes, the regular products can be shipped in 3 days, and the special rods can be ground in one week.
100% inspected before delivery. The inspection including raw material and dimension report will be sent you before delivery
Excellent grinding quality, Straightless and circularity could be 0.05 or 0.02.

HSC machining tempered steel tungsten carbide rods with straight holes KIC 9.2 ISO K10-k20 Cobalt: 8...

One straight coolant hole carbide rod for making cutting tools for steel stainless steel ISO K20-K40 ...

OD5mm small tungsten carbide straight hole rods for making drills for HRC 60 steel ISO K10-k20 ...

0.223" With 12.425" Long Tungsten Carbide Rods Blank W 2 Coolant Holes ISO K20-K40 Cobalt: 12% ...

K20-K40 One central hole carbide rods with straight coolant holes Outer diameter 8mm +0.2/+0.6 Inner ...

Raw Sintered Carbide Rods K15-K20 With Straight Coolant Holes For Steel Machining Outer diameter 6mm ...

Related Products