Baoji Feiteng Metal Materials Co., Ltd. |
|
Titanium Tube Target Titanium Gr2 ASTM B861-06 a 133OD*125ID*2140L Vacuum Coating Target
Item name | Titanium tube target |
Size | φ133*φ125*2140 |
Grade | Gr2 |
Packaging | Wooden case |
Port of place | Xi'an port, Beijing port, Shanghai port, Guangzhou port, Shenzhen port |
The properties of titanium are closely related to temperature,
morphology and purity. Dense titanium is quite stable in nature,
but powder titanium can cause spontaneous combustion in air. The
presence of impurities in titanium significantly affects the
physical, chemical, mechanical and corrosion resistance of
titanium. In particular, some interstitial impurities distort the
lattice of titanium and affect various properties of titanium. The
presence of impurities in titanium greatly affects its mechanical
properties, especially interstitial impurities (oxygen, nitrogen,
carbon) can greatly enhance the strength of titanium and
significantly reduce its plasticity. As a structural material,
titanium can obtain good mechanical properties by strictly
controlling the impurity content and adding alloying elements.
The light and high strength characteristics of titanium have always
been the focus of attention of automobile manufacturers. With the
progress of medical technology, metal implanted into human body is
a very common surgical procedure. Because titanium alloy and human
tissue rejection is relatively weak, it is widely used in
artificial bone, artificial joint, artificial teeth and other human
implants.
The coating target is a sputtering source. Under suitable
conditions, various functional films are formed on the substrate by
magnetron sputtering, multi arc ion plating or other types of
coating systems. In short, the target is the target of high speed
charged particle bombardment. In high-energy laser weapons,
different power density, different output waveforms and different
wavelengths of laser will interact with different targets, and will
produce different killing effects. For example, evaporation
magnetron sputtering coating is heated evaporation coating,
aluminium film and so on. Different targets (such as aluminium,
copper, stainless steel, titanium, nickel target, etc.) can be
obtained by changing different film systems (such as super hard,
wear-resistant, corrosion resistant alloy films, etc.).
Features
1. Low density and high strength
2. Customized according to the drawings required by customers
3. Strong corrosion resistance
4. Strong heat resistance
5. Low temperature resistance
6. Heat resistance