|
[China]
Trade Verify
Address: Room 406, No. 2, Qilin Building C, No. 53, Middle Section of Huangshan Avenue, Yubei District, Chongqing.
Contact name:Huang
TRW Medical Instrument Co.,Ltd |
|
Verified Suppliers
|
|
|
Product Highlights
1. More staples, more effective for stopping bleeding
2. Frosted nut with wing and the adjustment function, avoid slipping and feeling is more perfect
3. Using new scientific material making the reminder sound more clearly so that the operation is secure
4. Setting minimal anastomosis gap, avoids over pressing and damaging tissue
5. Equipment by surface treatment, moderate intensity, not glare because of reflection
| Product name | Specification | Knife Diameter | Tolerance | Staple Number | Staple height | |||
| TRW-PPH-04 | 32×4.0 | 22 | ±2.0 | 32 | 4.0±0.5 | |||
| TRW-PPH-05 | 34×4.0 | 24 | ±2.0 | 34 | 4.0±0.5 | |||
| TRW-PPH-06 | 32×4.0 | 22 | ±2.0 | 32 | 4.0±0.5 | |||
Instructions:
1. During the operation, use non-traumatic forceps to clamp the anal edge skin at the three female hemorrhoids (avoid clamping the hemorrhoids to avoid causing bleeding), so that the hemorrhoids and the lower rectal mucosa are slightly everted.
2. Insert the support sleeve into the anal canal and remove the anal plug. If necessary, the surgeon can secure the support sleeve with two sutures or atraumatic forceps at the 12 and 6 o'clock perineal positions.
3. Introduce the peeping sleeve through the dilator seat, and rotate the peeping sleeve to complete the purse-string suture around the entire anal canal.
4. Introduce the nail base assembly and make the nail base assembly penetrate deep into the upper end of the purse string, and then tie the suture
5. Take out the stapler body, remove the protective cover, rotate the adjusting nut counterclockwise until it stops, and connect the nail base to the stapler body. With the help of the wire rod, pull the tail end of the suture from the side hole of the staple cartridge assembly; knot or fix the suture that is pulled out of the stapler. During the introduction of the stapler, it is recommended to partially tighten the stapler.
6. Pull the ligation thread appropriately so that the prolapsed mucosa enters the cavity of the stapler cartridge component, tighten the hemorrhoid stapler to the appropriate position (green area) and fire. Keep it in the closed head state for about 20 seconds to prevent bleeding. Partially open the hemorrhoid stapler, pull it out gently, and check whether there is bleeding at the anastomotic ring. If there is bleeding, add local silk thread to stop the bleeding; the suture is completed.
