Tire changer/ Tyre changer/Tire Mounting machine ZH650SA
- For standard, low- profile and run-flat wheels of car and
light commercial vehicles
- Machine post tilted backwards / forwards upon pedal operation
(pneumatic) and pneumatically locked in working position
- Locking rim from 10"-24"
- Pedal assembly may draw from front cover
- Double help arm
- Self-centring four-jaw tumntable controlled via two clamping
cylinders for correct clamping of the wheel
- Plastic protection inside jaws and on mounting head to avoid
damage to alloy rims
- Large bead breaker blade
- Bead breaker with large anti- skid rubber pad
- |A| Rear air tank serves as tubeless tyre inflation device
Motor Power | 0.75kw/1.1kw |
Power Supply | 380v/220v/110v |
Max. Wheel Diameter | 41"(1040mm) |
Max. Wheel Width | 14"(355mm) |
Outside Clamping | 10"-21" |
Inside Clamping | 12"-24" |
Air Supply | 8bar-10bar |
Noise Level | <70 dB |
Our Advantages:
- Trainsway has been started since 1996, we produce quality products,
working with quality suppliers all the time.
- Fast response and quick delivery, usually lead time 30 days.
- R&D department provide with good and reliable design.
After Sales Service:
After Sales Service is supported and usually there will be solutions for you within 24 hours at working
day.
FAQ (Tire Changer)
- Q: What can we do if we think the bead breaker blade is weak when removing off the tyre?
A : Check if the working pressure has been reached 8-10 bars firstly,
secondly, check if there air leakage for the cylinder and bead
breaker. - Q: Where is the noise from when tire changing machine is working?
A: Check if the belt is loose firstly, secondly check if the gear
box problem. - Q: How to protect wheel rim from being scratched or damaged ?
A : Jaw cover as spare parts can be equipped to the four jaws, and pay attention to adjusting the
reasonable angle of the mounting and demountin g head.- Q: Can the right and left arm be equipped with all models?
A: Not exactly, usually the right and left arm are equipped with
ZH650 & ZH665 mostly.