FRP Fiber Glass Anti Glare Screen Board Plate For Road Highway Safety

FRP Fiber Glass Anti-Glare Screen Board Plate For Road Highway Safety

The anti-glare plate is a traffic safety product installed on the central divider of the highway for solving the glare of the opposing headlights. It is mostly installed on or in the middle of the guardrail of the central divider of the motorway, and there are also some installed on the movable guardrail of the central opening.

1:Resistant to high temperature and sunshine
Anti-glare panels are usually installed under the scorching sun, four seasons of wind, sun and rain, can still be used in extreme weather, high-temperature sun, can withstand strong sunlight, will not be deformed or discoloured due to high temperature, not easy to peel off, fall, crack, etc., very suitable for outdoor installation and use.
2:Strong corrosion resistance
The anti-glare plate is usually made of glass fibre reinforced plastic (FRP), which has strong corrosion resistance. And highways are very common everywhere, different regions with different air quality, anti-glare plate will not corrode and peel with the changes in air quality, wide range of applications, long service life.
3: Easy to install and maintain
The installation of anti-glare plate is simple, without the implementation of special technicians, simple and convenient operation, and the installation steps are concise and clear. In the process of use, anti-glare plate is also not easy to appear problems, without the need for more than one maintenance technicians, side to reduce the pressure of the economic cost of the project.
4: Good anti-glare effect
The most important thing about the anti-glare plate is to play the function of anti-glare. Anti-glare plate is not affected by the terrain, highway curvature, the height of the mountain road, etc., can be installed at will, and according to the installation of different spacing, its anti-glare effect is good, can reduce the occurrence of traffic accidents.
5: Cost-effective
The cost of anti-glare plate is low, easy to install, whether it is glass fibre reinforced plastic anti-glare plate or iron anti-glare plate, the raw material is easy to produce, the overall economic cost of the project is low, cost-effective.
6:Aesthetically pleasing
There are many shapes of anti-glare panels, anti-S, straight plate, leaf-shaped, etc. can be customised, which can add a touch of design to the highway landscape greening.
7:High fireproof and anti-collision grade
Anti-glare plate has good impact resistance and flame retardant properties, high fire rating, even if the highway accident, can reduce the incidence of fire and secondary accidents.

1. Prepare materials: road anti-glare plate, electric drill, screwdriver, screws, expansion pipe, hammer, red bricks and so on.
2. Find the installation position: according to the requirements of the road, choose the suitable position and fix the anti-glare plate on the designated position with screws.
3. Carry out foundation work: dig out a certain depth of pit for the installation position of anti-glare plate, then fill the bottom of the pit with red bricks or other hard materials, and then reinforce it with pouring concrete.
4. Use screws to fix: Use screws to fix the anti-glare plate firmly on the concrete foundation, and hit its surface with a hammer to make it more hard and stable.

Outer packing: Standard packing
For a small quantity of orders or sample order, we will generally choose to transport by air (DHL, TNT, etc)
Large orders we generally use the ocean shipping.

Roadsafe Group Limited was founded in 2005, we have our own factory to make all kinds of road safe products, our products could sell all around the world.Our most advantageous products are all materials road studs, especially ABS road stud which enjoys the high quality and low price in China. Meanwhile, we have other traffic products, such as traffic cone, delineator, delineator post, convex mirror, guardrail board, beads reflective panel, reflective films, traffic light, warning board, traffic paint, etc.We always put quality first, customer supreme, the observance of good faith-based.

1.OEM Service
Your own design is appreciated; we can make the approval sample according to your golden sample.
2. QC Service
a) Before the order to be confirmed, we should check the material & color of fabric by sample which should be strictly.
b) We will be tracing the different phase of production from the beginning.
c) Every bad quality will be checked & cleaned before packing.
d) Before delivery clients could send one QC or point the third party to check the quality.
e) We will try our best to help clients when problem occurred.
3. After-sale Service
a) EXW, FOB, C&F are also available for us.
b) If the products need certificate, we can also provide.

Q:Can I get a sample before bulk order ? how can I get it ?

A:Sample is free ,but freight collect.
You may tell us your express account No.
Also you could prepay the freight cost by Western union, we will send out sample asap once getting your payment.
Q:Can you do customers' styles?
A:Yes ,just send us the drawing ,then we could open a new mould for you to produce it as your request.
Q:Is this retail product?
A:sorry, it is wholesale product .
Q:Can we visit your factory ?
A:Certainly.welcome your visit.
Q: How to ensure the cargo quality?
A:We will supply bulk sample before shipping.They can represent the cargo quality.
Q: Why choose Roadsafe-Group Limited?
A:We are a manufacturer not trading company, we have produced the road safe products for years in Beijing, so the
price is quite competitive in the market, and the quality is suprior.
Q: What's the payment method?
A:T/T: Accept USD, EUR.
Western Union: Quickly to the account, Priority in delivery
Behalf Paying: Your Chinese friends or your Chinese agent can pay for in RMB.