Hydraulic Tractor Wood Chipper Farm Wood Mulcher Machinery &
Equipment BX62R With Low Price
The chipper has 2 pcs. Hydraulic pick-up rollers driven by the
hydraulic system of the tractor. The pickup rollers facilitate the
operator's work and increase productivity.
The hydraulic motors have a reverse that allows them to pull the
logs back when they are sewn. Reverse allows you to turn
hydromotors in both directions.
The chipper is able to process logs of up to 15 cm in diameter.
The chipper has 4 pieces. knives The size of the finished chip is
2-6cm and is not adjustable, as the knives are "tight" screwed with
4 screws on the disc. The chopper is small, its weight is ~ 500kg
and can be powered by a tractor with power from 30 horsepower.
The chopper has a 360 degree revolving exhaust pipe, which allows
you to change the direction of the chip blowdown.
The chipper is suitable for small farms, choppers - for chipping
branches, shrubs and forests.
The sides of the chipper rotor have extra teeth that grind the
small branches.
The chipper has 2 hydraulic motors with a reverse function that
pulls the branches, shrubs to the chopper rotor.
The chopper rotor has 4 knives, which are tightly attached to the
rotor with screws.
The diameter of the chopper rotor is ~ 77 cm, the rotor weight is ~
90 kg.
The size of the fridge loading hopper is ~ 63x63cm, the loading
hole at the rotor is ~ 17x30cm.
The chopper chip blasting pipe height is ~ 188cm, the blower tube
is 360 degree.
The chopper is fitted to the tractor with a 3-point hitch, the
rotor is driven from the tractor's PTO (540-1000 rpm), hydromotors
are driven from the tractor's hydraulic system. The chipper feed
rolls have a reverse function.
The required tractor has a capacity of 40 hp and up to 100 hp,
but the optimum power and fuel consumption ratio for chipper for
the maximum size (diameter 15cm) for logging requires a tractor
with a capacity of 60-70 hp.
