|
[China]
Trade Verify
Address: Bao Goose Industrial Zone B3 Building Egongling Pinghu Town Longgang District Shenzhen City Guangdong Province China 518111
Contact name:Lily
Shenzhen City Hunter-Men Plastics Products Co., Ltd. |
|
Verified Suppliers
|
|
|
Iron-on Hot Melt Adhesive Film for Heat Transfer Embroidery Patch Appliques
Description:
This product is a thermoplastic film hot melt adhesive, entrusted to the release of paper, can be repeatedly heated plasticized bonding.This kind of hot melt adhesive has excellent adhesion to textile products, PVC, PC etc.This product is resistant 40℃ washing.
Physical Characteristics:
| Color | Milky White | Release Liner | Glassine release paper |
| Density | 1.2±0.02g/cm³ | Conventional thickness | 0.05mm,0.08mm,0.1mm,0.12mm,0.15mm |
| Melt Flow Index | 32±5g/10min ASTMD1238-04 | Conventional Width | 50cm,100cm,150cm |
| operating Temperature | 120℃-160℃ | Length | 100yards/100meters or it's up on your option |
| Flow Beginning Point | 108℃±5℃ | Normal Products Specification | 100cm (width)*100yards(Length) /roll |
Recommended Bonding Conditions:
| First Lamination | Second Implanting | ||
| Mechanical Mold Temperature | 120℃-130℃ | Mechanical Mold Temperature | 140℃-160℃ |
| Hot Pressing Time | 3-5 seconds | Hot Pressing Time | 8-15 seconds |
| Pressure | 0.3-0.6mpa | Pressure | 0.3-0.6mpa |
How To Apply Heatseal (Iron-on) Patches to Garments:
1) Wash fabric first. Fabric softener should not be used.
2) Set iron to cotton setting. Do not use steam, and remove water from iron.
3) Lay your garment out on a hard, heat tolerant surface. A padded ironing board is not hard enough. Try placing a cutting board above padding.
4) Place heatseal side of patch onto fabric in desired placement area. Iron design for approximately 30-60 seconds, applying pressure. Do not move iron side to side as this may cause design to shift. Heavier fabrics may require more time, and lighter fabrics may require less time.
5) Allow time to cool, then make sure entire surface area is applied to fabric. If all pieces did not adhere, reapply heat for an additional 20-30 seconds. Allow to cool.
6) Turn garment inside out and apply iron to back of design area for approximately 30 seconds. Wait 48 hours before washing, and turn garment inside out when doing so.
Applications:
HT03 is widely used in adhesion embroidery trademark,laser registering,shoes,fabric composites,shield materials,sport equipment,package,box,clothing, shose and so on.
 | ||||
 |  |  |  |  |
| Embroidery Patchs | Shoes Weaving Mark | PVC logos | Aluminum | Sport Ware |
Conventional thickness* width*length:
120mic*100cm*100yards
120mic*150cm*100yards
120mic*97cm*100yards
120mic*50cm*100yards
120mic*48cm*100yards
Packaging Details:
1PC/PE FILM, 100yard/roll, 2 rolls/CTN, or it's up on the customer's option
Delivery Detail:
Shipped in 3-15 days after payment
