Active Member
|
[China]
Address: Middle of Xingye Road Jiayingguan Township Wuzhi County, Jiaozuo city, Henan Province
Contact name:Kevin
Jiaozuo Feihong Safety Glass Co., Ltd |
|
|
Refrigerator Glass Tray Household Appliance Parts Replacement Sturdy
Description of Refrigerator Glass Tray:
It is made of glass and is approximately 31 inches wide and 16 inches long. The refrigerator glass tray slides over the crisper cover and acts as a sort of lid. It also creates a shelf that you can place food and beverages on.
Size could be made as per your request. To ensure proper fit before ordering, please measure the area in which the glass fits (crisper pan frame, above the crisper) before ordering to ensure a proper fit.
Function:
| Decoration | Dimensioin | As clients' drawing |
| Certificate: | CCC | Other Name: | Fridge Glass Tray |
| Warranty: | 1 YEAR
| Shape | Flat |
| Condition | New | Glass Type: | Float Glass |
Toughened Glass for Refrigerator Glass Tray manufacturing
process:
Step 1 Float glass is cut to the desired size.
Step 2 Prior to the tempering process, the cut glass is checked for
flaws such as cracks, bubbles, and inclusions. The presence of
these imperfections can cause breakage during the tempering
process.
Step 3 The glass is washed to remove dust, dirt, and debris that
could interfere with the thermal tempering process.
Step 4 After it has been cut, checked for flaws, and washed, the
glass travels either in batches or in a continuous feed through a
furnace, where it is heated at temperatures over 600 degrees
Celsius.
Step 5 After the heating process, the scorching piece of glass
undergoes a cooling process. During this process, the glass
receives high-pressure blasts of cold air from varying angles for
about three to 10 seconds. The process, called “quenching,” cools
down the surface of the glass much faster than it does the center.
Because of this, the interior zone of the glass stays in tension
while the surface goes into compression. This combination of
competitive stresses is what makes tempered glass so strong.
Supply ability Refrigerator Glass Tray
Supply Ability: 1,250,000 Square Meters per Month
| Quantity(Square Meters) | 1 - 100 | 101 - 1000 | 1001 - 10000 | >10000 |
| Est. Time(days) | 7 | 15 | 20 | Negotiable |
Quality Inspection Item of refrigerator glass tray
1, Appearance, In the daytime (or in the case of similar brightness), observe vertically for 5 seconds with naked eyes or with the aid of glasses from a distance of 50cm or a distance of one arm length. No dirt or scratch, edge and corner, printing effect.
2, Printing appearance: the glass printing area (ink covered area) of the control panel is judged under the condition that the back has opaque cover (black background), and under the black background, it is acceptable that the front is invisible.
3, Evenness: bow shape ≤ 0.5%; there is one place (one peak and one trough) allowed for every 610mm of waveform;
4, Granularity test: two pieces of tempered glass are selected for each batch of glass to be tested, and the place where the center of the long side of the glass plate is 13mm higher than the bottom edge is taken as the breaking point (see figure). After the glass is broken, the two areas with the largest granularity are selected in a 50mm*50mm box for counting. The number of crack-free particles completely contained in the 50mm*50mm box must be ≥50, and the largest particle size must be ≤ 15 mm * 8 mm.
5, Impact test: drop a steel ball with a diameter of 51mm and a weight of 535g from the glass surface 648mm, and impact the center of the glass plate once to ensure that the glass does not break.
6, Thermal shock test: the tempered glass is heated to 287 5℃, and then immediately quenched with water (temperature 10 ~ 25℃) at the center of the glass plate, requiring the glass not to break.
Features of refrigerator glass tray
Has the unique gloss appearance, good light transmission
Corrosion resistance , easy clean, various colors.
Different patterns can be made. Its flower pattern or metallic
effect is clearly visible and beautiful
Tempered glass can be custom-made.
Safe packing to keep safe of refrigerator glass tray:
1. Interlay paper between two sheets.
2. Seaworthy wooden crates.
3. Iron/Plastic belt for consolidation
OEM Service :
OEM glass is avaliable here, just tell us the details of the
specification and other special manufacturing technique for
the toughened glass shelves in refrigerator, and you can get the
most satisfied product from us.
