Mini Reusable Sediment Water Filter Simple Mineral Self Cleaning Filtration

KSTP Design Mini Water Filtration Self-cleaning Simple Mineral Water Filter,Pre Sediment Water Filter

The Character of prefilter 

1, the upper part of the fuselage is ABS material, the lower part is PC material, all copper nickel-plated sewage switch.

2, food grade silicon phosphorus crystal 3, stainless steel filter, density standard 40-60μm precision filtration;

3, with scraping / no scraping function (two models);

4, the installation is simple, the standard four-point interface is easy to disassemble, and the matching wrench can be used to gently unscrew the

tank and clean the filter.

Main function:

Pre-filter is a reliable impurity filtering device. It is the nemesis of “secondary pollution” of household water, which restores the water quality of

the household to the standard of tap water. It is the first protective wall for domestic water, filtered from the source. Impurities, protect the health

of drinking water, and extend the life of pipelines and household water equipment.

Main use: Filtration of sediment, rust and large particulate matter in tap water. Preventing a la

rge amount of sedimentary impurities generated in the water supply network of cities and communities from causing harm to the human body,

and for dark pipes, faucets, plumbing, water heaters, boilers, central air conditioners, washing machines, dishwashers, coffee machines and

other water appliances (clean water) Machines, pure water machines, water softeners, etc. play an active role in pre-protection.

Working Principle

The silicon phosphate crystal is placed inside the pre-filter. The silicon-phosphorus crystal can react with metal ions such as calcium and

magnesium to form a soluble complex, inhibit the formation of calcium and magnesium salts and disperse into water to react with iron ions to

form a protective film on the tube wall to achieve anti-corrosion and anti-scaling.

Popular science:

1. The role of silicon phosphorus crystal:

Silicon-phosphorus crystals look like glass spheres, composed of polyphosphates and silicates, which are sintered at high temperatures into

glass spheres. The silicon-phosphorus crystal is slightly soluble in water, and the surface of the tube can be automatically repaired to prevent

the corrosion and scale of the metal material in the water. In addition, it can also penetrate the rust to make it fall off and clean the wall.

2. Things to be aware of when using silicon-phosphorus crystals:

Silicon-phosphorus crystals only act to prevent scale formation and corrosion. Therefore, the water filtered by using silicon-phosphorus crystal

must be filtered or boiled by RO membrane before drinking. The use of silicon-phosphorus crystals in drinking water terminals must also be

equipped with a timing drain to control the concentration of silicon-phosphorus crystals in the water. Because silicon-phosphorus crystals are

only slow to dissolve rather than low in solubility, water that is soaked for a long time will dissolve silicon-phosphorus crystals in a large amount,

which will also cause harm to the human body. Just like supplementing trace elements, it is a truth that it cannot be excessive.

Marketing 

Pre-filters have been widely used in Europe and the United States. Because of the installation of the front port of the positive pipe, it was named

as the front, in which Germany issued an injunction in 1988, requiring each household to install a pre-filter, and all buildings built after that must

be equipped with a pre-filter.

Every day, bathing, brushing, washing, washing, and even drinking water are all released from water pipes. The damage caused by dirty water

is greater than that of expired food. The water crisis is creeping in, and installing pre-filters is imperative.

Certificate