Wuhan Global Metal Engineering Co., Ltd |
Verified Suppliers
|
|
Stainless Steel Armored Hotlock Hot Runner Coil Heater With Screwed Cap And Thermocouple
1. Brief Introduction
GME Hotlock Mini coil heaters utilizes a positive locking
positioning ring and machined components to reduce manufacturing
complexity.
Installation is easy with a twist of the end cap ring the heater is
secured into position on the nozzle, and with the
integrated thermocouple slot located under the cap the
thermocouple is precisely located. No tools are required for
installation or removal.
2. Specification
Sheath material | Chrome Nickel Steel |
Insulation material | High purity MgO |
Heating element | NiCr 80:20 |
Thermocouple | 'J' type (Fe K) 'K' type (Cr Al) grounded or ungrounded |
Connection Wires | Stranded Nickel wires with PTFE coating |
Power Tolerance | (+5% ,-10%) (smaller tolerances on request ) |
Insulation Resistance | ≥ 500 MΩ at 500V AC |
Current Leakage | ≤ 0.5 mA at 253V AC |
Sheath Temperature | 750°C |
Dielectric strength (high voltage test ) | Min. 1000V |
Technical Drawing
3. Feature
4. Application