|
[China]
Trade Verify
Address: 2303 Century Square , Zhongnan Road , Wuhan ,China
Contact name:Frank
Wuhan Global Metal Engineering Co., Ltd |
|
Verified Suppliers
|
|
|
Spring Induction Coil Heaters Built In Thermocouple For Plastic Injection Machine
Description:
1.Hot runner coil heaters also know as cable heaters can be formed to a variety of shapes as required by its many application.
2.Frequenty though,coil heaters are configured as samll diameter,high performance nozzle heaters that are fully annealed.
3.Spring hot runner coil heates are use on injection molding machine nozzles and sprue bushings supplying bushings supplying 360 degree of heat with optional distributed wattage available.
4.Hot runner coil heaters are also used as cartridge heaters where irregular size bores are found.A straight,round cable heater can snake through a seal in packaging equipment installations.
Specification:
1. Standard sizes available with various cross section;
2. Various Watt Density options available;
3. Design with Terminal Exits;
4. Available with built in Thermocouple;
5. Designed for even heat appearance.
Cross Section | 1.5mm , 1.8mm, 1.3x2.3mm |
Sheath material | Chrome Nickel Steel |
Insulation material | High purity MgO |
Heating element | NiCr 8020 |
Voltage Range | Maximum 250 volts, standard 230 volts |
Power rating | Depending on application |
Insulation Resistance | 10 MW @ 500V DC (special on request) |
Power tolerance | ± 10% (Tighter Tolerance available) |
Current Leakage | < 0.5 mA @ 253 V AC |
Unheated Length | Minimum 25 mm plus adapter connection |
Minimum Bending diameter | 6mm |
Application:
1. Injection moulding machine nozzle
2. Hot Runner Nozzles & Bushings
3. Packaging machineries
4. Hot runner Injection moulds.
5. Injection & Blow Moulding Machine Nozzles.
6. PET prefrom & Thin wall container Moulds
7. Hot runner Manifolds.
