Home Companies Wuhan Global Metal Engineering Co., Ltd

Customized Hot Runner Brass Nozzle Electric Resistance Heater Pressed With Thermocouple

Contact Us

[China]

Trade Verify

Address: 2303 Century Square , Zhongnan Road , Wuhan ,China

Contact name:Frank

Wuhan Global Metal Engineering Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Customized Hot Runner Brass Nozzle Electric Resistance Heater Pressed With Thermocouple

Country/Region	china
City & Province	wuhan hubei

Product Details

Customized Hot runner brass nozzle heater pressed with thermocouple

Description:

1) GME Band heaters can be found in several types of dimension, wattage, voltages and material. Mica band heaters are an inexpensive industrial heating solution that surrounds pipes and tubes that require external indirect heating.

2) Pipe heating, drum heating, barrel heating normally used for oils, lubricants or any other circular applications. Band heaters use electric heating elements (NiCr wire) to heat-up the external surface of drums or pipes for a gradual heat transfer.

3) Industrial band heaters can be made with terminal boxes or moisture resistant terminal boxes that protect terminations and have the option of a thermostat or thermocouple digital temperature controllers to help control and regulate an applied heat.

Specification:

1.Sealed band heater in brass, with folded ends.

2.Band heater connection, waterproof technology.

3.Electric insulation by mica plate.

4.Connection: nick core, fiberglass insulated+earth wire, protected by a galvanized steel braid.

5.Max watt density: 5W/cm, (Wattage tolerance: +5%-10%)

6.Diameter: 25-150 mm

7.Height: 25-70 mm

8.Max. operating temperature over the surface of the heater 340 ℃,depending on working conditions.

Sheath Material	Chrome Nickel Steel
Insulators	High Grade Steatite Ceramic Insulators (High temperature)
Heat Saving Thermal Insulation	Ceramic Fibre (std.)
Heating Elements (coil)	NiCr 60:16, NiCr 80:20
Nominal Wall Thickness	Premium Heat : ½" Power Saver : ½" + 5/8" (Outer Insulation) Power Saver PLUS :½" + 1.5" ( Outer Insulation)
Connection	Fiber Glass Insulated- Metal Braided Flexible Cable (std. 12" long) mounted on rigid screw post terminals
Voltage Range	110V - 440V, Single
Surface Loading	35-55W / inch2 (depending upon model & application)
Power Rating	Depending upon application
Power Tolerance	± 10%
HV Testing	1.5 Kv between heating element and sheath
Insulation Resistance (Cold)	< 20 MΩ
Sheath Temperature	Up to 500°C maximum (Chrome Nickel Steel sheath)
Gap Between the Clamping Edge	5 - 10mm
Resistance	+/- 10%
Width :	Minimum 30mm and there after multiples of 15mm. Minimum 100mm in case of Power saver & Power Saver PLUS
Inner Diameter	Minimum 50mm Minimum 75mm incase of Power saver & 100mm for Power Saver PLUS