Active Member
|
[China]
Address: 18F, Building 2, Nantai Yunchuanggu, Phoenix Community, Guangming District, Shenzhen, Guangdong, China
Contact name:Amy
Shenzhen FRIDA LCD Co., Ltd |
|
|
21.5 Inch Ips Tft Lcd Display 1920x1080 With Lvds Interface 30 Pins 250 Nits
General Description:
M215HCA-L3B is a 21.5-inch LCD module with a-Si TFT-LCD technology from Innolux Corporation (Innolux), which is equipped with WLED backlight, no backlight driver, and no touch.
Specifications:
| Item | Specification | Unit |
| Screen Size | 21.5” real diagonal | |
| Driver Element | a-si TFT active matrix | - |
| Pixel Number | 1920 x R.G.B. x 1080 | pixel |
| Pixel Pitch | 0.24795 (H) x 0.24795 (V) | mm |
| Pixel Arrangement | RGB vertical stripe | - |
| Display Colors | 16.7M(8bit) | color |
| Transmissive Mode | Normally Black | - |
| Surface Treatment | AG type, 3H hard coating, Haze 25 | - |
| Luminance, White | 250 | Cd/m2 |
| Color Gamut | 72% of NTSC(Typ.) | - |
| Display Orientation | Signal input with “ INX” | |
| RoHS,Halogen Free &TCO 6.0 | RoHS, Halogen Free TCO 6.0 compliance | |
| Power Consumption | Total 15.93W (Max.) @ cell 4.05W (Max.), BL 11.88W (Max.) | |
Absolute Maximum Ratings:
| Item | Symbol | Value | Unit | |
| Min. | Max. | |||
| Storage Temperature | TST | -20 | 60 | ºC |
| Operating Ambient Temperature | TOP | 0 | 50 | ºC |
Electrical Specifications:
| Parameter | Symbol | Value | Unit | ||||
| Min. | Typ . | Max . | |||||
| Power Supply Voltage | Vcc | 4.5 | 5.0 | 5.5 | V | ||
| Ripple Voltage | VRP | - | - | 300 | mV | ||
| Rush Current | IRUSH | - | - | 3 | A | ||
Power Supply Current | White | - - - | - | 550 | 640 | mA | |
| Black | - | 530 | 620 | mA | |||
| Vertical Stripe | - | 700 | 810 | mA | |||
| Power Consumption | PLCD | - | 3.5 | 4.05 | Watt | ||
LVDS interface | Differential Input Voltage | VID | 100 | - | 600 | mV | |
| Common Input Voltage | VCM | 1.0 | 1.2 | 1.4 | V | ||
| Differential Input High Threshold Voltage | VTH | - | - | +100 | mV | ||
| Differential Input Low Threshold Voltage | VTL | - 100 | - | - | mV | ||
Interface Connection:
| Pin | Name | Description |
| 1 | RXO0- | Negative LVDS differential data input. Channel O0 (odd) |
| 2 | RXO0+ | Positive LVDS differential data input. Channel O0 (odd) |
| 3 | RXO1- | Negative LVDS differential data input. Channel O1 (odd) |
| 4 | RXO1+ | Positive LVDS differential data input. Channel O1 (odd) |
| 5 | RXO2- | Negative LVDS differential data input. Channel O2 (odd) |
| 6 | RXO2+ | Positive LVDS differential data input. Channel O2 (odd) |
| 7 | GND | Ground |
| 8 | RXOC- | Negative LVDS differential clock input. (odd) |
| 9 | RXOC+ | Positive LVDS differential clock input. (odd) |
| 10 | RXO3- | Negative LVDS differential data input. Channel O3(odd) |
| 11 | RXO3+ | Positive LVDS differential data input. Channel O3 (odd) |
| 12 | RXE0- | Negative LVDS differential data input. Channel E0 (even) |
| 13 | RXE0+ | Positive LVDS differential data input. Channel E0 (even) |
| 14 | GND | Ground |
| 15 | RXE1- | Negative LVDS differential data input. Channel E1 (even) |
| 16 | RXE1+ | Positive LVDS differential data input. Channel E1 (even) |
| 17 | GND | Ground |
| 18 | RXE2- | Negative LVDS differential data input. Channel E2 (even) |
| 19 | RXE2+ | Positive LVDS differential data input. Channel E2 (even) |
| 20 | RXEC- | Negative LVDS differential clock input. (even) |
| 21 | RXEC+ | Positive LVDS differential clock input. (even) |
| 22 | RXE3- | Negative LVDS differential data input. Channel E3 (even) |
| 23 | RXE3+ | Positive LVDS differential data input. Channel E3 (even) |
| 24 | GND | Ground |
| 25 | NC | For LCD internal use only, Do not connect |
| 26 | NC | For LCD internal use only, Do not connect |
| 27 | NC | For LCD internal use only, Do not connect |
| 28 | Vcc | +5.0V power supply |
| 29 | Vcc | +5.0V power supply |
| 30 | Vcc | +5.0V power supply |
Handling Precautions:
1.To assemble or install module into user’s system can be only in clean working areas. The dust and oil may cause electrical short or worsen the polarizer.
2.Do not apply rough force such as bending or twisting to the module during assembly.
