Active Member
|
[China]
Address: 18F, Building 2, Nantai Yunchuanggu, Phoenix Community, Guangming District, Shenzhen, Guangdong, China
Contact name:Amy
Shenzhen FRIDA LCD Co., Ltd |
|
|
10.1 Inch Tft Display 1280x800 With Edp Interface 30 Pins 250 Nits
General Description:
GV101WXM-N81 has a display resolution of 1280 (RGB) x 800 (WXGA), an aspect ratio of 16:10 (W:H), and a vertical RGB bar arrangement of pixels. Its display area size is 216.96×135.6 (W×H) mm, exterior size is 228.3(W)×149.05(H)×2.4(D) mm, and the surface finish is mirror (Haze 0%), Hard coating.
Specifications:
| Parameter | Specification | Unit | Remarks |
| Active area | 216.96(H) × 135.60(V) | mm | |
| Number of pixels | 1280(H) × 800(V) | pixels | |
| Pixel pitch | 56.5(H) × 169.5(V) | ㎛ | |
| Pixel arrangement | Pixels RGB stripe arrangement | ||
| Display colors | 16.7M(6bits + Hi-FRC) | colors | |
| Display mode | Transmission mode. Normally Black | ||
| Outline Dimension | 228.3× 149.05 × 2.4typ. | mm | |
| Weight | 155(max) | gram | |
| Surface Treatment | HC Glare | ||
| Back-light | Bottom edge side, 1-LED Lighting Bar Type | 36* LED Array |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Max. | Unit |
| Power Supply Voltage | VDD | -0.3 | 4.2 | V |
| Logic Supply Voltage | VIN | Vss-0.3 | VDD+0.3 | V |
| Operating Temperature | TOP | 0 | +50 | ℃ |
| Storage Temperature | TST | -20 | +60 | ℃ |
Electrical Specifications:
| Parameter | Min. | Typ. | Max. | Unit | Remarks | |
| Power Supply Voltage | VDD | 3.0 | 3.3 | 3.6 | V | |
| Power Supply Current | IDD | - | 212 | 272 | mA | |
| Positive-going Input Thresh old Voltage | VIT+ | - | - | 100 | mV |
Vcm = 1.2V typ. |
| Negative-going Input Thresh old Voltage | VIT- | -100 | - | - | mV | |
Differential Input Voltage | VID | 380 | - | 1200 | mV | |
Power Consumption | PD | - | 0.7 | 0.9 | W | white pattern |
PBL | - | 1.8 | 1.84 | W | W/I Driver | |
Ptotal | - | 2.5 | 2.74 | W | ||
Interface Connection:
| Terminal | Symbol | Functions |
| Pin No. | Symbol | Description |
| 1 | NC | NC |
| 2 | GND | Ground |
| 3 | EDP-RX1N | eDP RX channel 1 negative |
| 4 | EDP-RX1P | eDP RX channel 1 positive |
| 5 | GND | Ground |
| 6 | EDP-RX0N | eDP RX channel 0 negative |
| 7 | EDP-RX0P | eDP RX channel 0 positive |
| 8 | GND | Ground |
| 9 | AUX-P | eDP AUX CH positive |
| 10 | AUX-N | eDP AUX CH negative |
| 11 | GND | Ground |
| 12 | VDD | Power Supply, 3.3V |
| 13 | VDD | Power Supply, 3.3V |
| 14 | BIST | Aging Mode Power Supply |
| 15 | GND | Ground |
| 16 | GND | Ground |
| 17 | HPD | HPD |
| 18 | LED_GND | LED_GND |
| 19 | LED_GND | LED_GND |
| 20 | LED_GND | LED_GND |
| 21 | LED_GND | LED_GND |
| 22 | LED_EN | LED_EN |
| 23 | LED-PWMIN | LED PWMIN |
| 24 | NC | NC |
| 25 | NC | NC |
| 26 | VLED | LED Power Supply (4.5V - 12V) |
| 27 | VLED | LED Power Supply (4.5V - 12V) |
| 28 | VLED | LED Power Supply (4.5V – 12V) |
| 29 | VLED | LED Power Supply (4.5V - 12V) |
| 30 | NC | NC |
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Viewing Angle range | Horizontal | Θ3 |
CR > 10 | 80 | 85 | - | Deg. |
| Θ9 | 80 | 85 | - | Deg. | |||
| Vertical | Θ12 | 80 | 85 | - | Deg. | ||
| Θ6 | 80 | 85 | - | Deg. | |||
| Color Gamut | - | 50 | - | % | |||
| Luminance Contrast ratio | CR | Θ = 0° | 600 | 800 | - | ||
| Luminance of White | 5 Points | Yw |
Θ = 0° | - | 250 | - | cd/m2 |
White Luminance uniformity | 13 Points | ΔY5 | 62.5 | 71.4 | - | ||
White Chromaticity | Wx | Θ = 0° | Typ. -0.03 | 0.313 | Typ.+0.03 | ||
Wy | 0.329 | ||||||
Reproduction of color | Red | Rx |
Θ = 0° |
Typ. -0.03 | 0.590 |
Typ. +0.03 | |
| Ry | 0.353 | ||||||
| Green | Gx | 0.326 | |||||
| Gy | 0.570 | ||||||
| Blue | Bx | 0.157 | |||||
By | 0.116 | ||||||
| Response Time (Rising + Falling) | TRT | Ta= 25℃ Θ=0° | - | 30 | - | ms | |
| Gamma Scale | 2.0 | 2.2 | 2.4 | ||||
| Cross Talk | CT | Θ = 0° | - | - | 2.0 | % | |
Handling Precautions:
1.When expose to drastic fluctuation of temperature(hot to cold or cold to hot), the LCM may be affected; specifically, drastic temperature fluctuation from cold to hot, produces dew on the LCM's surface which may affect the operation of the polarizer on the LCM.
2.Never use the LCM under abnormal conditions of high temperature and high humidity.
