|
[China]
Trade Verify
Address: 150 Fenxi Road, Shangjia Urban Industrial Park, Building 2, Wanjiang District, Dongguan City, Guangdong Province
Contact name:Michael Chan
Perfect International Instruments Co., Ltd |
|
Verified Suppliers
|
|
|
Three Ponit Bending Tensile Testing Machine Flexural Strength Tester 2T
Machine Introduction :
Three Ponit Bending Tensile Testing Machine Flexural Strength
Tester 2T is suitable for various materials,including
finished articles and semi-finished articles. It can test tensile
strength, tensile elongation, compression, bending, puncture,
splitting, tearing, shearing and adhesive force etc.
This Flexural Strength Tester is controlled by an interior
computer. It is easy to manipulate, The surface is made by
extrusion molding aluminum board and has perfect painting coat,
which is endurable and artistic.This machine has two columns, and
we make a speical protective cover base on custom's requirement.
Three Ponit Bending Tensile Testing Machine Specification :
| Machine Name | Three Ponit Bending Tensile Testing Machine Flexural Strength Tester 2T |
| Model No. | PT-1166 |
| Capacity selection | 2,5,10,20,50,100,200,500,1000,2000kg Optional one,Ma 20KN |
| Measurement and control software | Professional test software Windows platform |
| Accuracy of measurement | Be better than ±0.5% |
| Force resolution | 1/500,000 |
| Effective range of measurement | 0.5~100%F.S |
| Deformation display accuracy | Be better than ±0.5% |
| Test speed range | 0.5～500mm/min,Can be arbitrarily set |
| Test maximum stroke | Maximum 1000mm, not including fixture |
| Effective test space | Before and after ∝,About 400mm |
| Unit switch | A variety of measurement units, including international units, users can also customize the required units |
| Stop mode | Upper and lower limit safety setting, emergency stop button, program strength and elongation setting, test piece failure |
| Special function | Can be held in tension, holding pressure and fatigue test |
| Optional configuration | Business computer 1, 1 color printer, PT-211 two points to extend the fixture, a variety of test fixture |
| Machine size | About 76×46×160cm(W×D×H) |
| Machine weight | About 165kg |
| Power | AC servo motor,Japan |
| Power Supply | 1PH,AC220V,50Hz,10A Or specify |
Three Point Bending Tester Standard configuration :
